0
Nope Id use type L straight tubing with soldered joints
Wiki User
∙ 16y ago
Add your answer:
Earn +20 pts
How do you hook -up a gas hot water heater?
residential? commercial? new ? replacement? if its a new water heater in a new home then the easiest way is to buy copper flex's and a gas flex and make sure you have low pressure gas at your gas stop like around 10 to 14" water column. Make sure you have a cold shut off on your cold water line before you hook up to the water heater and in some states they require a expansion tank. One good rule of thumb is if you have a check valve somewhere around your water meter or if on a well by your pressure tank then its a good idea to put a expansion tank.
How do you connect flex pipe to a copper tubing?
You use a compression fitting or something like a Sharkbite.
Why is there a flex on a plug?
Because after the plug is plugged in, there has to be some way of conducting the power away. That is achieved by cable or flex, using copper wires that are insulated for safety and other reasons.
How do you use fluidity in a sentence?
The word "flex" means to bend something that is pliant or flexible. Or it can also be used to refer to the contraction of a muscle as in, "The body builder would flex his arm and show how big his bicep muscle is." Other examples of the uses of the word flex: "As the strong wind blew, the young trees would flex from side to side." "When the diver jumped to begin his dive, the diving board would flex under his weight and allow him to spring off the board into the swan dive." "I have arthritis pain in my knee each time I flex the joint." "My stubborn co-worker would not flex his plan to fit the needs of the other department."
Can you connect PEX to a water heater?
No. Not directly. It needs to be 18 inches away... in length, not distance according to the UPC. An 18 inch water heater flex would work or 18 inches of copper tube with a pex adapter on the end will work.
I had a water heater installed and the guy used a galvanized elbow at the top of the heater to connect the copper flex hoses is this proper?
No its not.. this is a cheap way of doing it... You'll need to watch the galvanized pipe as it'll begin to rust and eventually leak due to the heat... The best is to use copper...
Should kids have flex time?
Depends on how muscular they are.
Which hockey stick flex is stiffer mid or regular?
The regular flex is a stiffer flex than the mid flex. A regular flex is comparable to an 85 flex. The mid flex is closer to a 75 flex.
If your elbow clicks every time you flex it what should you do?
Find a doctor.
You got a 97mph golf swing what flex shaft should you use?
Stiff flex would be ideal. But you could try x-stiff to see which one is best for you.
What does service b mean on my 2000 mercades e 320?
There are 2 different services on your model vehicle a "Flex a" service and a "flex b" service. they are done in rotating 10k miles intervals eg: 10,000 miles flex a 20,000 miles flex b 30,000 flex a 40,000 flex b and so on... The flex a is basically a glorified oil change, fluid check and tire pressure check. The Flex b is the Oil change, tire rotation, belts, brakes, fluid and hoses check and every 2 years you should be doing a brake and coolant fluid flush. Dealership prices vary, but the flex a usually runs about $275.00 the Flex B ususally runs about $475.00
What is firm shaft flex?
Callaway make this shaft flex, it is designed in between a regular flex and stiff flex shaft.
