Ensure that the air filter is not dirty and that the spark plug has a good spark. If these two things are in good shape and the ebgine still stalls when the load is applied, open (rotate counter-clockwise) the main needle valve on the carburetor about 1/8 turn for a slightly ticher mixture.
possible broken auger belt, or one that has slipped off the pulley
Jewel-Osco.
if one shear pin has been sheared then just line up the auger shear pin holes the same as the opposite auger shear pin then tap out damaged pin.
if one shear pin has been sheared then just line up the auger shear pin holes the same as the opposite auger shear pin then tap out damaged pin.
Replace Angus cable craftsman 3.8 snowblower
That means the auger is the only moving part that throws the snow. Two stage snowblowers have an auger to move the snow to the fast moving impeller.
check for stretched or broken auger belt
There are repair videos on the link below that will show you how to do it. Just copy and paste in your browser.
A two stage snow blower has the auger up front that moves the snow into the paddles that throws the snow. A single stage just has paddles, no auger.
May possibly be a loose missing or worn belt.
pull or press the bearing out and take to a local bearing/machine shop to measure
To remove newspaper jammed in a Toro snowblower auger, you'll need to first turn off the snowblower and disconnect the spark plug. Then, investigate the jammed area and slowly and carefully try to remove the newspaper by hand or using a tool. Avoid using excessive force to prevent damage to the auger blades or any other components.