The marks on the chain and the sprockets are set in such a way that the chain is installed at 50 deg after tdc. This is done so that the pistons are not at tdc where they could hit the valves while trying to install the chain. The marks are the only thing after tdc. When the chain is installed properly, the valves and pistons will be in proper time and the valves will be closed when the piston is at tdc. All you have to do is ine up the plated links on the chain with the proper marks on the sprockets.
Closest to serpentine belt
A wrist pin is the part that connects the piston to the connecting rod.
what is piston order of 3.8 amc engine
I have never heard of a no piston.I have never heard of a no piston.
It's the front (front of the engine is front of the car) piston on the right side of the engine.
TDC is Top Dead Center (referring to a specific piston, usually the #1 piston).
No need to when disassembling.
The timing marks can assist a mechanic in setting the engine timing. The number one timing marks will set the number one piston so that the number one valve can be properly adjusted.
4
Closest to serpentine belt.
Front driver side
A bent engine piston is a reference to the piston rod. The piston cannot be bent, but the piston rod can be bent.