Check your brake fluid. Next maybe your brake lines need to be bled. OR you just might need new brakes.
if you squeeze the lever slowly, the bike will brake slowly.
by holding the brake slowly
failing brake caliper caliper seizing
You would push down on both the front brake and the back brake. You would want to put a little more pressure on the back brake and slowly add pressure to the front brake. If you slam on the front brakes there is a possibility that you will fly over the handle bars. I know from experience and it is not fun. I hope this helped.
It really is quite simple - in the cab you are presented with 5 principle controls:ThrottleReverserIndependent brake (Brakes the locomotive only)Train Brake (Brakes the entire train)Hand Brake.How to drive:Place the reverser into the forward position.Ensure all the brakes are off.Put a small amount of throttle on to make the train move.To stop:Put the independent brake and train brake on.When you have come to a halt, disengage both brakes, put the reverser back into neutral, and apply the handbrake.
brake fluid level will go down slowly as your disk brake pads wear. Just keep it topped up.
A brake system brakes.
pad brakes are disc brakes, it's known as changing brake pads for disc setup and changing brake shoes with drum brake setup.
someone sits in the car slowly pressing the brake peddle while you have the brake line open. When finished bleeding the brakes, don't forget to refill the master cylinder.
The plural of "brake" is "brakes."
we are having back brakes problems
You will wear out the brakes prematurely and you may also overheat the brakes and experience brake fade (no or poor brakes).