Potassium hydroxide
Cathode, anode, electrolyte.
yesA battery is condutor because it free to move
To limit the rate at which the charge is put into the battery in order to prevent overheating, boil-out of the water in the acid electrolyte, and eventually ruining the battery.
The temperature sensor provides feedback to the charger to allow the charger to determine when the battery is fully charged. The battery under charge develops internal heat as it approaches full charge. The temperature sensor measures the heat (temperature) and reports it back to the charger to end the charging cycle.
The function of the Magic Eye® state of charge battery indicator is based on the specific gravity of the sulfuric acid or electrolyte. When a battery is charging, the change in the density of the acid is a little delayed as compared to the actual state of charge of the battery. However, the battery indicator should show green once the battery is back to 100% state of charge. There may be several reasons as to why it is not showing green: 1. If the battery was allowed to remain in the dis-charged state for a great length of time, the battery may in fact be bad and the battery indicator will not show green because the electrolyte has not reached the proper specific gravity. The specific gravity of the electrolyte is the most accuarate method of measuring state of charge. 2. The acid in the battery is "stratified" meaning that the heavier acid has sunk to the bottom and the lighter water is floating near the top. This happens with batteries that have sat for a long time in the discharged state. Normally, re-charging will stir the electrolyte make it more homogenious. 3. There may be a small piece of battery separator material preventing the green ball from floating up. The best thing to do is gently rock the battery back and forth. This will mix the electrolyte and will most likely free the green ball to float up "IF" the specific gravity of the acid is dense enough. Keep in mind that even though the Magic Eye®is located in only 1 of 6 cells, testing conducted by a major OE car company proved that the battery indicator accurately indicates the state of charge of the entire battery.
never
Nicad batteries have sodium hydroxide electrolyte. Citric acid powder will neutralize it.
what is a neutralizing agent for NiCAD
No.
The two common rechargeable battery types are lithium and NiCad. One is called a lithium ion battery. The other is commonly called a NiCad battery, containing both nickel and cadmium.
Batteries contain something called electrolyte. In things like car batteries the electrolyte is often a liquid, which can be messy since liquids can leak. A gel battery is simply a battery using a gelled electrolyte.
Batteries contain something called electrolyte. In things like car batteries the electrolyte is often a liquid, which can be messy since liquids can leak. A gel battery is simply a battery using a gelled electrolyte.
It is Electrolyte and the primary acid in Electrolyte is Sulfuric Acid.
the answer is c : 1400 mAH
In NiCad batteries the negative electrode is made of Cadmium, while in NiMH batteries it is made of an intermetallic compund, consisting of a rare earth (such as Lanthanum or Cerium) and a transition metal (such as Manganese or Nickel). anonymous@oola.com
The electrolyte in a lead storage battery is a solution of sulfuric acid and water.
to check how much electrolyte is present in the battery