Want this question answered?
None, as there is no such engine as a 5.0 dohv
no
Some vehicles do come with double over head cam. If yours has it, it would say right on the top of the head in big letters DOHV. If not then it is a regular over head cam
if you have 2.4l dohv engine, remove the intake tube ,then there is a rectangle black cover with 4 bolts,take that off and you will see spark plugs under it with deep shafts to the plugs.
The 4A-GE engine produced from 1995 to 1998 was known as "Black Top" and was the final version of the 4A-GE engine and has black cam covers, getting it's nickname. But they never came in 2.0Liter. They were 1.6L and first DOHV 16 valve. Oh I forgot..model the Tercel
i hope your talking about a 2.4 l dohv. automatic.make sure car is in park. put on parking brake. have someone crank car (needs to be at operating temperature) then remove transmission dip stick and look on stick to see where fluid level is. ( dip stick is located between brake booster and right driver side of engine.)
if you have a 2.4l dohv 4cyl. the firing order is 1,2,3,4 front to back.the wiring of 4 cyl. is very straight forward. 1 to 1,2 to 2, 3 to 3, 4 to 4. i do not have wiring diagram on v6 though.
I have a 97 and assume it is in the same location. Open the hood. Stand at the drivers side fender and look straight down to the transmission. It should be located just to the rear of where the CV-Shaft comes out of the transmission - in the vacinity of the motor mount.
No. Dove is a bird, therefore it is a noun.A verb is a word that describes an action (run, walk, etc), a state of being (exist, stand, etc) or occurrence (happen, become, etc).A noun is a word that is used to describe a person (man, lady, teacher, etc), place (home, city, beach, etc) or thing (car, banana, book, etc).
this one is tricky. hopefully your wanting it for 2.4l dohv 4cyl.. disconnect battery,make sure you have some liquid wrench, take off intake tube going to air filter.take battery completely out of car (this gives you some elbow room). look at intake manifold and remove bolts,( this is the big aluminum one with throttle body attached) and all the hoses,connectors and fuel rail.The starter moter then can be reached from top and underneath car.(jack up car on passenger side will give more elbow room.( make sure you use jack stands!) the starter bolts are REALLY done up so if your trying to break them loose you will jiggle the car quite a lot.Disconnect starter harness.Some models have 4 bolts,some have 3 bolts. Anyway one bolt is from back to front while the others are front to back. The top bolt(s) are a son of a gun to physically reach,but it can be done, if your arms are thin and you are flexible and can stand the challenge.(pain)