http://www.kick-fix.com/t-belt/tbelt.html
no need to buy an FSM or post this answer a million times. so i have it here.
1 time.
valid for 89 -98 1.6L Suzuki' sidekicks and Geo trackers (same motor )
It is not timed with a timing light. It is set to 0 deg with a scan toolIt is not timed with a timing light. It is set to 0 deg with a scan tool
Timed by cdi
The distributor is not "timed". It is Synced to 0 degrees with a scan tool. IT can not be done with a timing light.The distributor is not "timed". It is Synced to 0 degrees with a scan tool. IT can not be done with a timing light.
No. There are many things that have to happen to blow an engine in this manner. Your engine went out of time as soon as your chain broke and this will sometimes sound like it blew sky high. Replace the timing chain and get it timed and it should be ok.
I have a 93 Suzuki Sidekick and it wont start either. The spark seams to come and go. Also the spark seems like it is late? I have replace the timing belt the Coil and the ignitor on top of the coil as well. The compression also is fine. did you check for spark at the coil when it goes? does test fuel start car. is car flooding? look at plugs, wet and stinks of fuel? bad fuel bad cam timing. bad front of crank key way , sheered or mangled thowing timing way off flooding, try WOT cranking to clear fold , WOT shuts off all FUEL on kicks. miss timed Distributor. horrible bad need of a tune up.
it does not mean that. it means that the timing is off so it has to be timed by a timing gun pointed at the distributer and adjusted
its timed off number 8
The 2001 Grand AM was not available with a belt timed engine. All engine options are chain timed.
It is not timed with a timing light. It is set to 0 deg with a scan tool.
you dont. It is auto timed thru the camshaft sensor and crankshaft sensor, You have to have the timing belt timing marks right on to get correct timing.
all timing marks are on the belts and cams. just line them all up and it will be timed
It is not "timed", the distributor is zeroed or synced to the crank with a scan tool.It is not "timed", the distributor is zeroed or synced to the crank with a scan tool.