Tools needed to replace front brakes 2002 Ford Focus?
What tools are needed to replace secondary air pump on 2001 Oldsmobile intrique
Common metric hand tools.
Plumbing tools should be replaced as needed,most quality tools carry a lifetime warranty.
Common hand tools, sockets and wrenches. Nothing special.
To replace the brake pads on a Toyota Tercel a jack is needed. Some other tools that will be used are a socket wrench, screwdriver, lug wrench, and a pair of pliers.
The supercharger has no battery.
To replace the brake pads on a 96 Grand Am, three tools will be needed. First, a C-Clamp, then a hex key to remove the caliper bolts, and a screwdriver to work the caliper free.
The tools needed for an oil change tend to be common tools. A floor jack is needed to access the oil pan. A pan which is used to drain oil into. A wrench and socket set is used to remove and replace the oil cap.
The oil pan must be removed. No special tools required, just normal mechanics tools.
Normal mechanics tools and a good torque wrench.
All you need is common hand tools. A boxed end wrench and sockets.
you will need a c-clamp and screwdriver and ratchett set.
What size motor? What accessories do you have? BClear.
a rachet a pipe and some patience
About $400.00 worth!!
you need to press them in.if you put your ball joints in the freezer overnight they will shrink.Then heat up your a- arm with a torch and use a jack to pop the frozen ball joints in
becase if they have specal tools that are needed to replace the string.
Do I need any special tools to replace front wheel bearings on a Saturn 2002 L200?Also what is the procedure for doing so?
the only tools need are a 17 inch socket a rachet a "C" clamp to push the piston back in.
No special tools are needed!
It is pretty technical and special tools are needed. Take it to a garage.
To replace brakes effectively, you need to know what type of brakes you have. In general, you will need a jack, new brakes, a wrench and Allen wrenches.
A simple adjustable wrench is all you need to replace the plumbing under a kitchen sink. It's a simple procedure.