0
Add your answer:
Earn +20 pts
Is the Intake manifold of a Mazda 6 2.3 the same as the one of the 2.3 Mazda 6?
yes
Where is the PCV valve located on a 2005 Mazda 6i with a 2.3 liter?
It is located under the Intake Manifold. You must remove the intake manifold to get to it.
What is the torque for Mazda tribute 2008 hub nut?
214 ft-lbs or 290nm
Where do you find the starter on a 1992 Mazda protege lx?
on the back side if engine under intake manifold on the back side of engine under intake manifold
Where is the location of the PCV valve 3.0 Ltr Mazda Tribute?
Pcv valve on a 3.0L V6 Mazda tribute is buried under the intake manifold. It is approximately under the throttle valve. It is NOT inserted into a rubber grommet in the rocker cover. It is screwed into the lower intake manifold. Use a deep 7/8" 12 point socket to twist it 90 degrees to the left to remove it and reverse this to put it in. Be sure to replace the PCV valve when replacing the spark plugs since all needs to have the intake manifold removed to get to them.Normally located on top of the valve cover.AnswerMost are inserted into a rubber grommet in the rocker cover.
Where are the fuel injectors located on a Mazda 6?
In intake manifold under fuel rails.
Where is the EGR valve located on a 2001 Mazda 626 V6?
Under the intake manifold.
How many Intake Manifold Gasket has Mazda millenia 2.3 1998 have?
6 gaskets
How do you change spark plug on a mazda tribute 2004?
Disconnect the battery, remove the intake manifold, remove the spark plug boot covers and cables, and remove the old spark plugs. Put in the new spark plugs, attach the spark plug boot covers and cables, replace the intake manifold and connect the battery.
What is the wheel torque specs for a 2002 Mazda tribute?
Lug nuts? 95-105 Ft. Lbs.
Where is the oil filter on a 1994 Mazda Protege?
Behind the engine, under neath the intake manifold.
Where is the PCV valve on your 2002 Mazda tribute?
If you have the 3.0L the pcv valve is located under the fuel rail under the intake manifold. You cannot remove with finger power...The valve turns out counter clockwise with some force.
