EGR Systems
Mazda 626
Ford F-150
Ford F-350

Where is the EGR valve located on a 2001 Mazda 626 V6?


Top Answer
User Avatar
Wiki User
2008-04-29 21:50:59
2008-04-29 21:50:59

Under the intake manifold.

User Avatar

Related Questions

Where is the thermostat located on a 1999 Mazda 626?

A 2001 Mazda 626 V6 - 4.2 quarts A 2001 Mazda 626 4 cylinder - 3.7 quarts

Where is the cabin filter located on a 2002 Mazda 626?

located in the haines manual found at auto zone or advanced.

I have a 99 Mazda 626 and my starter is located right next to the oil filter.

the solinoids are located in the valve body. it in inside the transmission pan.

Where is starter on a 4 cylinder mazda 626?

Where is the thermostat located on a mazda 626 2002

It is located under the trottle body. Milt

It is on the transmission. It has a vacuum hose connected to it. It is round, about two inches in diameter. Robert Foley.

one is located in the exhaust pipe under the manifold the other is located behind the catalytic converter in exhaust pipe.

The 1997 Mazda 626 starter is located near the back of the engine at the bottom. You can follow the positive battery cable from the battery to the starter.

it is underneath the air filter housing,look for the large coolant hose

i have a 2001 mazda 626 v-6 2.5 engine my timing belt broke i had the belt and tesioner pulley replaced and its running fine

The 1999 Mazda 626 alternator is located on the right hand side of the engine. The alternator will be near the front of the engine.

The 2000 Mazda 626 transmission dipstick is located in the engine compartment, near the firewall. The transmission dipstick will have a bright yellow handle.

On the 1998-2002 Mazda 626 v6 the Egr valve is located on the back right side toward the bottom of the engine. It is located in a very hard area to get to between the engine and the firewall. If you take out the intake system and the throttle control you can see it more clearly. there are two coolant lines connected to it. There are some picture of it at

On a 1997 Mazda 626 4-cyl, the (electric) fuel pump is located inside the gas tank.

will a 1997 Mazda 626 transmission or engine interchange with a 1999-2002 Mazda 626 transmission or engine

The CPU for a dome light on a Mazda 626, and most other Mazda vehicles, is located near the main fuse box. This is found under the hood.

The purge valve on the '96 626 is located on the passenger side of the engine. It bolts onto the intake manifold. There are 3 valves that make up this unit and all three are bolted on as one piece. Hope this helps. You can go to any auto parts website and search for purge valve and it will show you what it looks like.

how many belts are in mazda 626

The brake fluid reservoir on a 1989 Mazda 626 is on the master cylinder. This is located in the engine compartment on the drivers side.

The reservoir is located on the master cylinder in a Mazda 626. To add fluid, simply remove the reservoir cap and pour fluid in.

Copyright ยฉ 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.