For the 1996 Pontiac Grand Am 3.1 liter 6-cylinder, the torque for the intake bolt is 10 ft/lbs. The torque for the rod bearing cap in step one is 15 ft/lbs, and in step two turn an additional 75 degrees.
need torque specs for 3.4 pontiac grand am intake and rocker arms
Cylinder head gasket torque specs on 2003 Pontiac Grand Prix 3.1 L V-6
what are the torque specs for lifters on a 2000 Pontiac grand am gt
Torque specs for a 1996 Pontiac Grand Prix 3.1 is 185lb-ft of torque at 4,000 RPM.
18 ft pounds
The torque of the 1998 Pontiac Grand Prix is 220 ft.-lbs. at 4000 rpm. This remained the standard for all sixth generation models of this car.
The intake manifold torque specs for the 3.1 L on a 2001 Pontiac Grand Prix is 195 ft lb. and 264 Nm at 4,000 rpm. It also has 175 hp at 5,200 rpm.
The 2001 Pontiac Grand Prix 3.8 liter engine intake bolt torque specification is 45 pounds. The intake bolts should be torqued in 15 pound intervals.
first get new head bolts. they are torque to yield. torque them to 37 ft-lbs and then rotate an additional 120 degrees.
The short bolt torque specs for the head gasket of a 2000 Pontiac Sunfire is 43 foot pounds. The torque specs for long bolts is 46 foot pounds.
The head bolt torque specifications, for your 2002 Pontiac Grand Prix, is 160 pounds per square inch. The head bolts should be torqued in 40 pound intervals.
For the upper intake manifold bolt on a 1999 Pontiac Grand Am, apply 25 N·m 18 lb. ft toque. It is best to have a reputable repair manual on hand to double check your specs.