The 2001 Pontiac Grand Prix 3.8 liter engine intake bolt torque specification is 45 pounds. The intake bolts should be torqued in 15 pound intervals.
need torque specs for 3.4 pontiac grand am intake and rocker arms
The intake manifold torque specs for the 3.1 L on a 2001 Pontiac Grand Prix is 195 ft lb. and 264 Nm at 4,000 rpm. It also has 175 hp at 5,200 rpm.
lower intake is 115 in pounds upper is 18 ft pounds
For the 1996 Pontiac Grand Am 3.1 liter 6-cylinder, the torque for the intake bolt is 10 ft/lbs. The torque for the rod bearing cap in step one is 15 ft/lbs, and in step two turn an additional 75 degrees.
For the upper intake manifold bolt on a 1999 Pontiac Grand Am, apply 25 N·m 18 lb. ft toque. It is best to have a reputable repair manual on hand to double check your specs.
i need the torque sequence for a 1998 pontiac grand am 2.4 quad
what are the torque specs for lifters on a 2000 Pontiac grand am gt
Torque specs for a 1996 Pontiac Grand Prix 3.1 is 185lb-ft of torque at 4,000 RPM.
The EGR valve is located on the side of the intake on the 2000 Pontiac Grand Am. It is close to the intake manifold.
Cylinder head gasket torque specs on 2003 Pontiac Grand Prix 3.1 L V-6
280
The torque of the 1998 Pontiac Grand Prix is 220 ft.-lbs. at 4000 rpm. This remained the standard for all sixth generation models of this car.