When bulbs on a Toyota Corolla are working but one is not, it is usually a burnt out bulb. You can change this yourself.
Several possibilities: (1) check the fuses first - the high beam fuse may have blown (2) the high beam switch may have broken (3) a broken or grounded wire in the circuit (4) Possible-but highly unlikely- is that both high beams could have failed at the same time and you would need 2 new bulbs.
Camry 1999 has only on bulb for both low and high beams.
I-beams are divided into ordinary I-beams, light I-beams and H-beams. I-beams are mainly used in crossbeam construction. Shanghai Changzheng produces I-beam, if you are interested in I-beam, welcome to consult with our company.
try checking ur high-bea fuses and relays
the high beam indicator is only on when the high beams are on
If it's the same as the 1996 Ford Ranger , fuse # 33 is a 15 amp fuse for the High beam lamps
The high beam wire on the 2004 Toyota Tacoma is red with yellow stripes. You can use a test light to determine which wire is active when the high beams are on.
I-beams are divided into ordinary I-beams, light I-beams and H-beams. I-beams are mainly used in crossbeam construction. Shanghai Changzheng produces I-beam, if you are interested in I-beam, welcome to consult with our company.
cantilever beam,contineous beam,fixed beam,simply supported beam
Singular, beam's plural, beams'
low beams
First double check the bulbs to be sure they are good then I would suspect the high/low beam switch or the headlight switch is at fault.