If the turn signal no longer turns off automatically, there is probably a broken part inside the steering wheel for the turn signal switch. Part of the mechanism could have broken off and gotten jammed in the path of the lever.
The blinker switch is located to the left of the steering column. It is bolted up behind the dash board. It is not with the fuse box.
in the steering colume you must pull stering wheel to get to it
The signal switch is located under the steering wheel. It is also know as the mutifunction switch. It operates many functions.
bad signal switch on steering column..
u need to replace with a turnsignal light switch . there is a short in steering column
turnsignal/wiper switch
probably your blinker switch (multi-accessory switch). The high mount brake light is wired directly from the switch on the pedal but the rear two lights are wired through the pedal switch and then through the the blinker switch on the steering column. Almost all of those blinker switches go bad.
requires disabling airbag removing steering wheel and turnsignal cam remove switch retaining lock then switch install is reverse consult manual to disable airbab as to avoid injury
On most cars theres a switch to turn them on and off automatically after your steering wheel becomes stright aging after using the blinker that could be broke or you have a short some where in your dash
The turn signal switch is on the steering column. The "relay" is an internal part of the computer that is inside the underhood fuse box.
Inside the steering column. You must remove a cover from the under side of the column and the relay is inside.
These vans are notorious for this. Replacing the wiper switch will fix it. The wiper switch is the wiper and blinker control. (the entire black assembly on your steering column where you turn your blinker and wipers on) contact me a sideburns2009@gmail.com