If you already checked your bulbs then check your fuses, usually this is the case when all the lights stop working at the same time.
test your multifunction switch,located on left side of steering column
What year is your Impala? 2001
Two different switches. The combination switch on the column is most likely the culprit. This may be fuses. The turn signals and hazard lights are fed by separate circuits.
It shouldn't, if it is installed correctly. If I were you I would consult with a professional.
my daughters 1991 miusbishi montero has no break lights , turn signals or hasard lights . All tail lights and front markers are working. All fuses are cking good and all bulbs are good..Is my blinker switch bad ? capri
It probably has 2 Flasher Relays. One for the hazard lights and one for the turn signals. Replace the turn signal flasher.
bad fuse or hazard switch
Change front light bulbs
A terribly designed Body Control Module, courtesy of Chrysler!
walmart blinkers christmas lights buy where?
One fuse controls the function of the hazard, reverse, and turn signals of the car. When there fuse blows all the components stop working.
so what do i do if my blinkers do not when the lights are on
Change out the switch. Bad switch!!
Test if your hazard lights work. There are normally two flasher cans in most vehicles. If the hazard lights work, It is likely to be the flasher can that works the indicators is blown and in need of replacement. These will be available for under $50US from most auto parts stores.
Check the fuse
try playing with ur hazard lights. mine has a short somewhere and i have to wiggle the hazard light switch then the blinkers work
Hazard lights should only be used when your car is stopped or coming to a stop. Using them while you are actually still driving can be dangerous. Other drivers will be unable to tell if you are going to change lanes or get off the road because your turn signals or 'blinkers' will not work when your hazard lights are on.
Please if you find out the answer let me know! I am having the very same issue on a 95 and I cant figure it out.
It's the turn signal indicator-located behind the hazard lights.You have to take it out and replace it.
You have a bad relay. Your blinkers run on a different relay than you hazards do.
i had the same problem...turned out the hazard flashers button on top of steering column was in the wrong position ! ...talk about simplr..hope it works for you
The hazard and blinker lights are located behind the dashboard tray. To fix the fuse, you unfortunately had to take the dashboard out.