poo smells nice in bananas
When to change out a timing belt on 06 vectra sri Mileage wise
Just really want to know the timing belt settings please?
Its has a timing belt (2.0l 16 valve dual cam ) and a timing chain in rear of camshaft.
when to chang timing belt on peugeot 407 hdi 1.6
if you haven't removed the belt get a very sharp Stanley knife cut off half of the belt length wise fit new belt partially then removed the rest of old belt and ease the new one fully on then it doesn't matter what you're timing marks are if you have removed the belt though it depends whether it's 8 or 16 valve let me know
there is no " timing belt " sensor, but there are 2 sensors that control the timing. One is the crankshaft sensor and the other one is the camshaft sensor.
you have a timing belt its be-hin the cover
Yes, it can bend valves when a timing belt breaks.
left front engine up, take timing belt cover off. Remove timing belt. remove bolts from water pump. but new water pump on. Set timing belt in the same position. But the timing belt and the pullies back on. Then your Finished. Looking at the repair manual this is a lot harder than it sounds because, u have to remove the motor mount to remove timing belt.
http://www.kick-fix.com/t-belt/tbelt.html follow 16v procedure if your car is a 1.8L sport , it dont have a belt.
42 minutes,16 seconds-YEAH !!!
If it is a CRX then I believe it is an interference engine and yes you could have possibly damaged your valves pistons or both with the timing belt failure. The only way to know for sure is to do a compression test on the vehicle assuming it will still turn over after you fix the timing belt