typically a washer pump breaks. Replace it. How to replace a washer pump?
The washer pump has probably failed or is plugged with dirt.
Located on the bottom of the washer fluid reservoir.
I have a 92 Ranger, I found my washer fluid pump directly under the washer fluid reservoir.
you may have a block in the line behind the pump stopping the fluid
It is in the bottom of the washer fluid tank. Look underneith the tank.
The windshield washer pump on a 2002 Camry might have quit working because of a hole in a vacuum line. Also, inspect the washer fluid tank for leaks and check the pump and pump fuse.
You need to check for 12v at washer pump connection when washer turned on. If 12v present at harness connector but pump not working, replace pump. If pump is working, but no fluid coming out at wipers, you will need to remove front hose and blow out any debris clogging hose.
The washer pump is on the fluid tank under the air filter
The pump is attached to the bottom of the washer fluid bottle.
most washer fluid pumps are on the resivour itself
If the windshield water pump is not working either the fuse is blown, pump has failed and needs replacing, problem with the wiring to the pump, washer fluid level is too low, washer hoses are disconnected or crimped, or the orifices near the windshield are clogged.
The pump is screwed into the bottom of the washer fluid reservoir