885x140=123900grams of copper sulphate per hour. If you are talking about using 885 gm of copper sulphate per ton of ore in the solution then the density of the copper sulphate(penta hydrate now because it's in water) is 2.284 gm per cm3 so that's 2.284x5=11.42gm per liter of solution, so 123900/11.42=10849.387 liters of copper sulphate(pentahydrate) per hour, NOTE:this is only how much copper sulphate is being used total in the solution which is 30% of the total liters used of solution because 25% of the water is inside the copper sulphate, the other 70% is just water. If you want the liters per hour of solution total, it is 34964.62 litres per hour of your 5% solution. I hope this was what you were looking for, I saw noone had answered and decided to try and get you what you needed.
The formula of ammonium sulphate is (NH4)2SO4, showing that each formula mass contains one sulphur atom. The formula mass of ammonium sulphate is 132.13, and the gram atomic mass of sulphur is 32.06. Therefore, the percent by mass of sulphur in ammonium sulphate is 100(32.06/132.13) or 24.26, to the justified number of significant digits.
256 liters
Copper sulphate solution testA simple 5 percent copper sulphate solution, applied in the same way as the water drop test, should confirm the differences between non-stainless steels and stainless steels. A metallic copper coloured deposit should form easily on non-stainless steels, but the solution should remain free of copper colour if the sample is a stainless steel.
50 percent of the dissolved minerals will condense out of solution by crystallization.
12ml
A pharmacist mixed a 20 percent solution with a 30 percent solution to obtain 100 liters of a 24 percent solution. How much of the 20 percent solution did the pharmacist use in the mixture (in liters).
The formula of ammonium sulphate is (NH4)2SO4, showing that each formula mass contains one sulphur atom. The formula mass of ammonium sulphate is 132.13, and the gram atomic mass of sulphur is 32.06. Therefore, the percent by mass of sulphur in ammonium sulphate is 100(32.06/132.13) or 24.26, to the justified number of significant digits.
How much 50 percent antifreeze solution and 40 percent antifreeze solution should be combined to give 50 gallons of 46 percent antifreeze solution?
It is CuSO4.5H2O - cupric sulphate pentahydrate.
10
2%
144liters
128 liters
A 3 percent solution is 1.5 times as strong as a 2 percent solution.
256 liters
mary mixed 2l of an 80% acid solution with 6l of a 20% acid solution. what was the percent of acid in the resulting mixture
Copper sulphate solution testA simple 5 percent copper sulphate solution, applied in the same way as the water drop test, should confirm the differences between non-stainless steels and stainless steels. A metallic copper coloured deposit should form easily on non-stainless steels, but the solution should remain free of copper colour if the sample is a stainless steel.