Need more info like year, make and model.
i have replaced my clutch to 10.5 diemter ,can i re use the morso flywheel/clutch bolts
The torque converter is located between the engine and transmission. The clutch packs are inside the transmission. This car has no mechanical clutch as it is an automatic. There is also a clutch mounted on the front of the A/C compressor.
P0740 Torque Converter Clutch Circuit Malfunction The torque converter will need replaced.
The torque converter clutch is inside the torque converter.The torque converter clutch is inside the torque converter.
what is the torque for the bolts on the clutch springs for a trx 90/>
I need the torque urgently.
It is inside of and is part of the torque converter.
what are the torque specs for clutch and fly wheel model 5700
If the vehicle has an automatic transmission, then the torque converter clutch is probably sticking. The clutch is controlled by a solenoid, that moves it back and fourth. The clutch material can get stuck to the inside of the converter and stall the engine. Have the transmission flushed, and if the problem persists, then have the solenoid replaced.
You should use the clutch anytime you shift, up or down. It is possible to downshift without the clutch, when there is little torque involved, such as slowing for a stop, but that still causes momentary high torque on the engine and transmissioin components. There is usually a torque spreader inside that will handle these torque transients, but it is designed to only handle the momentum of the transmission and final stage clutch, not the input stage clutch and engine.
Torque Converter Clutch.
The PowerGlide is a very primitive transmision by todays standards. It does not have a Torque Converter clutch. So there is no control for it.