On the drivers side of the transmission bellhousing
Check out :
www . the ranger station . com ( no spaces )
Click on Tech Library
Under the manual transmission section they have a good write-up on how to bleed a hydraulic clutch
how to i change a clutch in a 1993 ford ranger
Some cars have no valve and you have to loosten the line to bleed the cyl. Fill the slave cyl as full as you can get it before mounting it .
For a 1993 Ford Ranger : ( DOT 3 brake fluid , meeting Ford specification ESA-M6C25-A ) is used as a fluid for the hydraulic clutch
yes.
Brake bleeder? Clutch bleeder? Coolant bleeder?
The bleeder valve for the brakes on a 1997 Ford Ranger is located in the brake line where it meets the brake disc. The wheel will have to be removed to access the bleeder screw for drum brakes.
Probably a worn out clutch disc.
you don't adjust it. It is a Hydraulic clutch unit. you have to bleed it. There is a 7/16" bleeder valve on the transmission. clay Colorado
how do I bleed the clutch system in a 2004 ford ranger
I believe that is inside the manual transmission bell housing
can you use a transmission from a 1993 ford ranger in a 2000 ford ranger?
How to replace a clutch interlock switch on a 1997 Ford Ranger XLT