Your question is not clear.
Static pressure in metres head converts to kilopascals: one metre of head is 10 kPa, 10 m is 100 kPa, and so on.
static head
"Head" is a term given to the weight and resulting pressure of a column of liquid above a given point in the system. Static head means that the head pressure is measured with no liquid actually flowing. Dynamic head would be the pressure of the liquid while it is actually flowing.
This is the calculation for how much static pressure shall be created by the pump to flow the water in chiller loop or for the pump to flow the water for cooling tower cycle.
Head = (Pressure * specific gravity)/2.31 Head in ft Pressure in pound per in^2
If water is flowing through pipe, no head pressure can build up. Blocking off flow of water will create head pressure in pipe as long as pipe is vertical. A vertical column of water creates head pressure.
static head
Static === still, motionless --- Head refers to the pressure water in motion will create a 'head' just from being in motion.
STANDARD 1kg\10m the other system is to to insert a throttle valve at the flow lime of the pump and pressure gauge helps us knowing the STATIC head pressure.
"Head" is a term given to the weight and resulting pressure of a column of liquid above a given point in the system. Static head means that the head pressure is measured with no liquid actually flowing. Dynamic head would be the pressure of the liquid while it is actually flowing.
Static pressure is the pressure exerted by fluid in all directions, when it is in rest. Stagnation pressure is the sum of static and dynamic pressure of fluid in motion. Dynamic head is given by (velocity)^2/2*g.
Tested to 10 feet of head pressure (static)
The pressure exerted by the pressure head of liquid steel in a container at bottom surface of the container is known as ferro static pressure.
The static head the distance to the point of application or the height the pump has to overcome for liquids. For air likewise is almost the same except that it is ducted, refer to Moody chart.The pressure exerted by a still liquid or gas, especially water or air.
Static head is: The internal energy of a fluid due to the pressure exerted on the containing vessel. Static head remains the same regardless of volume. For each meter you raise the container, the water pressure is amplified by 9.804139432 kpa (kilopascals) At sea level, 1 meter head of water is approximately 10kpa, (atmospheric pressure is 100 kpa.) If you're in my Horticulture class and you're copying this, then you fail! xD -Matt
the trap contains condensate water the fan sometimes provides more pressure then the static pressure of the head of water in the trap. this releases the pressure and the flat ducts see the difference of the inside and outside pressure so if that fan has a maximum static head of 4" a 5" deep trap will stop the thump.
The recommended water pressure is 0.5 to 1 bar
A common unit conversion in engineering is from velocity meters for a pump head to pressure bars. This conversion is done by multiplying the pressure by 10.197 and dividing this value by the specific gravity.