0
What action should the plumber take on discovering a noisy gas meter?
Wiki User
∙ 11y agoWant this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
How can you find resistance of a component?
The simplest way would be to use an ohm meter. To measure it correctly it should be disconnected.
What could be the cause if meter M3 displays a higher current reading than it should?
resistor R1 is shorted
What is the weight of 1 tmt rod?
the weight should be change by the diameter of the rod.one rod length is thirteen meter and it should be measured in meter only. The formulae to find the weight of rod is d square /162 and you wil get unit weight then multiply it in length then u got a weight of the rod.
Why meter in and meter out is not in pneumatic system?
Meter in and meter out circuits are not in pneumatics as air is compressible.Hence uniform control of actuators are not possible
How can you measure sound without a decibel meter?
The decibel meter is better known as a sound level meter. You can measure sound by a microphone and a vu meter, a peak meter, or a AC voltage meter. The reading given by such a meter does not correlate well to human-perceived loudness.
What are the release dates for Ed the Plumber - 2004 Abatement Meter?
Ed the Plumber - 2004 Abatement Meter was released on: USA: 8 September 2007
What size gas meter do you need on your house if I am installing a tankless hot water heater?
Standard meter will suffice, need to know pressure from meter to house. Size pipe appropriately for gas pressure coming into house X distance to water heater. Gas company or plumber should be able to help with this calculation.
Can you replace your own electric meter?
Not unless you are a licensed and certified plumber and have the authority to possess and install your own regulating device.
Does increasing gas meter size override need to increase pipe size?
No. Meters are set for different outgoing pressures. Higher pressure coming out meter allows for smaller piping to be used. A gas pressure regulator will be needed at each appliance to reduce gas pressure to required gas pressure for appliance. Gas company should be able to take care of meter. Gas company or plumber should know how to size piping.
A plumber had a 5-meter length of pipe in his truck He used 120 centimeters of the pipe on a new hot water heater and 240 centimeters to repair a floor drain How many meters of the pipe are left?
5m - 1.2m - 2.4m = 1.4m The plumber has 1.4m of pipe left.
Is running meter equal meter?
Yes. The name is sometimes used to distinguish from square meter or cubic meter, but just calling it "meter" should be enough.
DO people other than DWP Meter Readers have the right in opening?
If your not a employee to that company you are breaking the law. That device isn't yours. However if it was by accident ( from a plumber or what ever) then call the company.
Who is mad meter tape?
No meter tape is mad. If it was, then it should talk to the yardstick about its problems.
Who would you contact regarding parking meter keys?
You should contact the transportation department for the city where the parking meter is located. They will be able to transfer you to the parking authority, who should have the keys to the parking meter.
How deep should a main water line be from meter to house in Kentucky?
how deep should water line be from meter to house in Versailles Kentucky
How many millimeters eqauls 1 meter?
Should be 1000mm
What is the recommended height of a meter socket from the ground?
the meter socket should be 1.8m from finished ground
