There are no adptors to plug a 240v plug into a 120v receptacle. 240v requires two hot wores and a neutral and ground. 120v requires one hot wire, a neutral and a ground.
If you have something that runs on 240/120 you need the cord and adaptor that came with the equipment as you willl need the wires to mate up accordingly.
Yes, you need a transformer
It all depends on the supply voltage. In the UK the supply voltage is 240V therefore the amps would be 1500w/240v = 6.25A. In the USA (with a supply of 110v) the amps would be 1500w/110v = 13.64A. All you need to remember is the formula 'amps = watts/voltage'
Some do and some don't. You need to check the power supply's specifications. The input voltage and frequency range is normally stated on a label visible from the rear of the computer. Many modern PC power supplies will accept a range of input voltage and frequency, or at least have a switch to chose between 110V/60Hz and 240V/50Hz.
No. The black is 220, the red is 220, and the ground serves as the neutral. the last answer "no" is correct but the reason is not. the ground is still a ground. the red is 110v and the black is 110v. together they are 220v. the neutral or (common) is for a 110v return. for example a stove or a dryer will have 2 hots a common and a ground because they use 220v and 110v. 220v to power the heating elements and 110 for the controls, light bulbs or the outlet on a stove. A construction heater only uses 220v and only requires the two hots and the ground for safety.
This is not a cut and dry answer as it depends on the application. 240v only needs two wires to operate with a green (ground) for safety. Single phase (residential) 240 wires are generally black and red (or a red tracer), but the National Electric Code does not stipulate the colors (as long as they are not green or white). Three phase colors are generally black, red, and blue and also require a green ground (as does EVERY electrical application). The white wire is a grounded conductor. It is only used in 110v applications. For 240v home appliances such as ranges or dryers, 110v is required for the controls so the cable would contain a green (or bare) ground, a white (for the 110v, and a black and red for the 240v. Things like water heaters that don't require control voltage don't need the white wire. Pinky
Using a box that is hire voltage than what you need can cause a short, and even a fire. So using a 240V box, when all you need is a 110v receptacle, wouldn't be a good idea.
You need a step-up transformer, to go from 110 to 220-240 volts. Then a 110 volt supply can operate 240 volt equipment.
Yes, you need a transformer
Check your laptops power adapter to see if it will handle both 240v(UK) and 110v(US) if it can handle 240v (which I believe most can) then all you need is a UK plug adapter.
The power adapter need 230v, 50Hz supply
In the US, both 120v and 240v will be needed for your home, as different appliances need different voltages. Your TV needs 120V, while your electric dryer and stove will need a 120V/240V supply. If you have an electric water heater, or central AC unit, they will need a 240V supply.
You need a dedicated circuit for that. You cannot power a 220V device off 110V.
You need to convert the voltage if your appliance requires less voltage than you power supply. example: appliances is 110V and power supply is 220V.
It all depends on the supply voltage. In the UK the supply voltage is 240V therefore the amps would be 1500w/240v = 6.25A. In the USA (with a supply of 110v) the amps would be 1500w/110v = 13.64A. All you need to remember is the formula 'amps = watts/voltage'
A European hairdryer operates on 230V. US power is 110V. The hairdryer will need a high power converter that will be fairly expensive. (110V input to 240V output rated at about 800W) It will be less expensive to buy a new one at Walmart when you get to the US than it will be to buy a converter for the European one.
Yes, you can use a 230 volt device on a 240 volt supply.
No. There are no "adaptors". To get 240V from a 120v supply you use a 120-240V step up transformer. <><><> Clothes dryers, water heaters and and other high-power 240 volt appliances cannot be run on a transformer from a 120 volt circuit. They must be powered from a separate branch circuit that has the right size breakers, cable and socket outlet to suit the appliance.