0
First I would check all possible grounds, use an ohm meter make sure you have power to the tail lights if so ground the tail light housing with a jumper wire if the lights work check and clean all ground cnnections.
Wiki User
∙ 17y ago
Add your answer:
Earn +20 pts
What would cause the Brake lights on a 2000 s10 to not work at all Turn signals work Tail lights work Reverse lights work but none of the 3 brake lights work.?
You probably need to replace your brake light switch. It's near the top of the brake assembly, beyond a trim panel. The fact that all three brake lights don't work rules out problems in the multifunction switch (the cause of similar problems affecting only the two rear lights.)
Can the brake lights not work and the night lights work same bulb?
my back brake lights don't work, but the brake light on the back door does what could be wrong
Why does your left LED brake light not work at all and your right LED brake light work when taillights are on?
you need to repair the lights and they will both work and your taillights will work properly
Brake lights don't work when the brake is pushed. Work with headlights on only.?
The brake lights and the tail lights are separate circuits. Check the brake light fuse, then check the brake light bulbs, then check the brake light switch.
What would make your brake lights not work?
The most likely cause is a bad brake light switch (if none of the brake lights illuminate) but if its only one of the brake lights, try changing the bulb. Even if they still work as running or turn lights because they have a double filament and may still work partially, but not as brake lights.
The brake lights dont work on my 1989 Mercury Grand Marquis but all other lights work?
change the brake lights check the fuse check the brake light swtch
1995 Pontiac grand amdash lights don't work and blinkers don't and brake lights don't work but the fuses are good?
You need new bulbs
Brake lights dont work on your 1997 Ford Taurus..has to be the wires.. maybe the brake switch..?
First things first you need to check your fuses. In the owners manual you will find the location of the fuse that relates to the brake lights. Take the fuse out and hold it up to see if the connection is broken if it is replace and the brake lights should work.
Why do my brake brake lights only work when i press the wires on turn signal arm 1998 lumina?
the blinker switch shorted out the brake lights... really really common problem, need to replace the switch
Why would the tail lights work on a 1990 jeep Cherokee but the brake lights don't work?
check the fuse for the brake lights, they have thier own. also check the brake light switch at the at the top of the brake petal
What could cause a 99 Chevy Malibu's left tail lights not to work but brake-turn do?
To be more specific, the ground wire must work and the bulbs, fuses, etc.. Or the back up lights and turn signals and brake lights wouldn't work? Right? Could it be the back panel...and still let the brake/turn/backup lights work? I need help fast. Thanks!
My brake lights or turn signals don't work on my Cadillac deville?
How do you replace brake lights
