0
What are Check engine codes 22 23 31 35 12 13 14 15 and 17 on a 1990 Subaru Legacy?
Wiki User
∙ 15y ago
To the best of my knowledge, 22-knock sensor, 23-airflow sensor, 31-throttle sensor, 35-canister purge solenoid valve, 12-starter switch, 13-cam angle sensor, 14-injector #1, 15-injector #2, 17-injector #4. Cheers.
Wiki User
∙ 15y ago
Add your answer:
Earn +20 pts
How do you retrieve ENGINE codes on 1994 subaru legacy?
Above the gas pedal, under the dash, there is 2 wires with clips that you plug together. Check engine light will flash the codes recorded in the ecu.
Your 94 Subaru legacy just all of a sudden started losing power at low rpms?
clean maf/throttle body with approved cleaner check engine codes fuel filter
Subaru cruise control vacuum?
If you're having problems with your cruise control, I would suggest that you check into your Subaru's transmission and engine error codes to see what it's returning if anything. Many times the problem with the cruise can be diagnosed by the vehicle itself. The car will not allow the cruise control to function if it knows about a specific problem, which will be given in the error codes. I don't know what year subaru you have, but look into getting both the engine (check engine light) error codes and the transmission (power light) error codes on your Legacy to see what they're returning. My speed sensor was out on my Subaru. Once I found the problem in the error codes, I swapped it out and my cruise worked just great.
Stereo colour codes Subaru legacy?
see www.12volt.com
What are car stereo wiring color codes for a 2005 Subaru Legacy?
http://ae64.com/Legacy-pinout.htm
What does the check engine light mean when it comes on and what should be done for a 1993 Subaru Legacy GT Turbo?
It means that there is a problem with your emissions control system, have the codes read. Most big chain parts stores will do it for free and you can figure out what needs attention from there.
Where do you find the On Board Diagnostics for a 1990 Subaru Legacy Sedan?
You read the trouble codes on the dsahboard "engine check" light. To get the codes out you connect two black, single wire connectors under the dash near the steering column while the ignition is turned off, then turn the key on and the light should flash a code. More information can be found at... http://www.troublecodes.net/Subaru/ .
What does a check engine light with code 66 and code 22 mean 1996 legacy GT?
Ask the guys at Auto Zone. They likely have the codes.
How do you turn on the 4WD in a 1992 Subaru Legacy Wagon?
The 4wd is automatic in the 1992 Subaru Legacy Wagons. There is an empty fuse under the hood that has a cover that says FWD that can be used to disable the 4wd and force it to be in front wheel drive, but by default, there should not be a fuse in it. When there is a fuse in the FWD connector, the dashboard will have a warning light that says FWD, indicating that you do not have 4wd enguaged. If the light is not lit and you do not have 4wd then you have a transmission issue that will likey need the expertise of a transmission specialist. Check the transmission error codes (as opposed the the standard engine error codes.) They will likely help you pinpoint the problem.
Why Subaru 2003 Forester Check Engine Light stays on?
You have a problem with the engine controls, have the codes read at the dealer or an auto parts store and make the necessary repairs and the light will go out, or it can be reset by the tech.
Why my subaru legacy do not remove check engine light after fix the problem?
because you do not know what year it is. if old car remove negative battery cable for 15 minutes. if new car take to car parts store with OBD-II tool and have them reset codes. If light still comes on, then car still has problems.
How do you reset the check engine light on a 1998 Subaru Outback?
Try disconnecting battery for 10 mins. If light comes back on have vehicle scanned to determine if there is a problem or have codes "cleared"
