0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
Can you put a 350 intake manifold on to a 283 block?
yes all sbc manifolds will fit, when you get to cyl heads then you will have trouble since most aftermarket are for 350 bore which is larger
Will 350 vortec heads work on a sbc 350 engine?
the water jackets are different , the motor will keep running hot
Is there an adapter for this I Want to put a 78 350 into 96 Tahoe but intake is vortec is there an adapter or different intake that you can get?
there is no adapter. vortec heads were cut at a diffrent slope than standard sbc heads. you can swap the heads on the 78 350 for vortech heads or get a multipoint fuel injection intake for a 85 - 95 350. you can get the intake from summitracing.com You will have to swap the heads and the intake
What machining do you have to do to put a 400 sbc crank in a 350 sbc?
The main journals need to be turned down.
How much does a 350 sbc weigh with aluminum heads and intake carb headers alternator water pump?
350 chevy with aluminum heads and intake carb and headers weigh
Where can one purchase SBC aluminum heads?
There are a variety of places where one can purchase SBC aluminum heads. One can purchase SBC aluminum heads online on the eBay website, and other retailers as well.
Will a sbc 350 starter motor fit a sbc 400?
Yes.
Will a 350 sbc bolt to the same transmission as a 400 sbc?
yes
Will a sbc 350 flywheel fit sbc 400?
yes but it has to be 83 or newer
Are sbc 350 pistons and sbc 400 pistons the same?
No. Standard 350 engines have 4.00" pistons, standard 400 pistons are 4.125".
What is the horsepowerof a 1972 sbc 400?
its about 350
Will a 350 sbc tune port injection fit in a 400 sbc?
It should work well.
