There is no hot water inlet in a water heater. There is a cold inlet and a hot outlet. Yes it can be connected to the hot outlet depending on the jurisdiction. Check the plumbing codes in your area to be sure.
Inlet line will be bigger then the outlet line. on the contrary on my motorcycle fuel pump, the inlet and outlet are the same size!
The Circulatory System of the body is a simple plumbing system with a central pump, and a bunch of pipes that carry the Fluid around. The pump (heart) has an outlet and an inlet. The arteries are connected to the pump's outlet and the veins are connected to the pump's inlet. So, there you have it.
Inlet refers to an entry point where substances, such as air, water, or other materials, are introduced into a system or environment. Outlet, on the other hand, is the exit point where these substances are released or expelled from the system. Together, they facilitate the flow and exchange of materials in various contexts, such as plumbing, engineering, and environmental systems.
valve clearance hot - inlet mm 0,3 and outlet 0,56
The inlet side is the low side - this will have the larger hose. On a Thermal Expansion Valve system, this hose will run from the evaporator outlet to the compressor inlet. On a Fixed Orifice Tube system, this hose will run from the accumulator outlet to the compressor inlet. The outlet side is the high side, and the hose will run from the compressor outlet to the condenser inlet.
Upper and lower radiator, inlet and outlet heater core, bypass,Upper and lower radiator, inlet and outlet heater core, bypass,
Generally a "pond" is taught of as a still body of water smaller than a lake. "still" implies no flow movement and would mean that there is no inlet or outlet. However, the term "pond" is sometimes extended as in "Mill Pond" which would have both an inlet and an outlet.
Inlet or outlet
The purpose of the inlet valve washer in a plumbing system is to create a watertight seal between the inlet valve and the water supply pipe. This seal prevents water from leaking out of the system and ensures that water flows only when needed, contributing to the overall efficiency and functionality of the plumbing system.
outlet ports are smaller to reduce the exhaust losses
For efficiency's sake, the outlet had best be a lot cooler.