Inlet refers to an entry point where substances, such as air, water, or other materials, are introduced into a system or environment. Outlet, on the other hand, is the exit point where these substances are released or expelled from the system. Together, they facilitate the flow and exchange of materials in various contexts, such as Plumbing, engineering, and environmental systems.
Inlet line will be bigger then the outlet line. on the contrary on my motorcycle fuel pump, the inlet and outlet are the same size!
Generally a "pond" is taught of as a still body of water smaller than a lake. "still" implies no flow movement and would mean that there is no inlet or outlet. However, the term "pond" is sometimes extended as in "Mill Pond" which would have both an inlet and an outlet.
The 'inlet' on a muffler refers to the side in which the exhaust gasses from the manifold enter the muffler. The outlet is the side that the gasses exit out to the tail pipe/s.
valve clearance hot - inlet mm 0,3 and outlet 0,56
The inlet side is the low side - this will have the larger hose. On a Thermal Expansion Valve system, this hose will run from the evaporator outlet to the compressor inlet. On a Fixed Orifice Tube system, this hose will run from the accumulator outlet to the compressor inlet. The outlet side is the high side, and the hose will run from the compressor outlet to the condenser inlet.
A tee is a plumbing fixture with one inlet and two outlets, or two inlets and one outlet. A cross is a fixture with one inlet and three outlets, or three inlets and one outlet.
Upper and lower radiator, inlet and outlet heater core, bypass,Upper and lower radiator, inlet and outlet heater core, bypass,
Inlet or outlet
outlet ports are smaller to reduce the exhaust losses
For efficiency's sake, the outlet had best be a lot cooler.
it is the pressure difference between inlet and outlet of pump.
Compressor outlet to metering device inlet.