If you mean a broken ball joint, you may need a cold chisel and hammer or air grinder to remove the steel rivets and a tool called a "pickle fork" to drive between the ball joint and the spindle to separate the ball joint from the spindle taper after removing the cotter pin and nut.
Begin by removing the tire and wheel from your Kia. Remove the ball joint retaining nuts. Pound the ball joint out with a hammer. Reverse the process to install your new ball joint.
There is no tricks, and no special tools. Just remember to dis-connect the strut at the lower ball joint- that way you won't mess up the camber adjustment.
The ball joints can be replaced by removing the wheel. Remove the rotor and brakes. Pound the old ball joint out. Insert the new ball joint with a ball joint compressor.
It is a tool mechanics use to separate the ball joint from the bracket or steering knuckle. The ball joint stud is tightened into a hole that is tapered (morse taper). Removing the nut will not separate it without force.
Begin by removing the tire and wheel from your 1992 Mitsubishi. Remove the ball joint retaining nuts. Pound the ball joint out with a mallet or hammer. Reverse the process to install your new ball joint.
you have to use a press to pop out the ball joint, you might consider removing your a arm and bring it to a shop with press so that you can have your new ball bearing pressed
Remove the tire and wheel from your 1992 Chevrolet S 10 Blazer. Removing the brake assembly and the brake rotor will give you more room to work. Remove the ball joint nut. Pound the ball joint out with a hammer. Reverse the process to install the new ball joint.
The CV joints on a 1995 Ford Taurus can be replaced by removing the front tires, and the nuts on the lower ball joint. Next, the lower ball joint will need to be removed and the CV joint can be removed.
The joint in your shoulder is a Ball & Socket Joint.
The axle assembly has to be removed before removing the nut on top of the ball joint. I have a tool that I use to press the ball joint out and press the new one in. Not a fun job for a 71 y.o. person
The hip joint is a ball and socket joint.
The ball joint in a vehicle is used to pivot between the wheel and the suspension. There are usually and upper ball joint and a lower ball joint.