Cost, quite simply. As opposed to traditional trains where power comes from the pushcar of the train, a Maglev train doesnt propel itself, the track does. This means that expensive electromagnets with several electrical substations dotted along its path need to be constructed throughout the entire track's length. The initial cost of building these lines is too high for economically disadvantaged countries.
The disadvantages of using the Maglev is that the Maglev tracks cost more than railroad tracks do. Whole new sets of tracks would need to be built for the Maglev to run.
Many transportation vehicles in Europe run on existing track, like the TGV trains in France. Although Maglevs are pretty quiet, there is still noise caused by air disturbance. Also another disadvantage is that if a high speed line between two cities it built, then high speed trains can serve both cities but more importantly they can serve other nearby cities by running on normal railways that branch off the high speed line. The high speed trains could go for a fast run on the high speed line, then come off it for the rest of the journey. Maglev trains wouldn't be able to do that, they would be limited to where maglev lines run. It would be very difficult to make construction of maglev lines commercially viable unless there were two very large destinations being connected. Of the 5000km that TGV trains serve in France, only about 1200km is high speed line, meaning 75% of TGV services run on existing track. The fact that a maglev train will not be able to continue beyond its track may harm its usefulness.
maglev is short for Magnetic Levitation.
The maglev train floats over its track using an electromagnet. Maglev trains have managed speeds in excess of 370mph. A model of the maglev train uses two permanent magnets to get the model to float over the track.Describe how the magnets must be arranged to get the model Maglev Train to float.
Magnetism elevates the maglev train because like forces repel. Maglev trains are not suspended, but are elevated.
no
The levitation of a maglev train is controlled by safety critical microprocessors (computers).
It doesn't. The maglev train is engineered for weight distribution that is unaffected by normal loading.
You must mean a Maglev train. A Maglev train operates on maglev (magnetic levitation). It uses electromagnets (and possibly superconductors) that repel each other to lift the train above the ground to reduce as much friction as possible.
They get on from an opening passage way that comes out of the maglev train
== ==
barney is on the train chewing chicken
The maglev train was first invented in 1902 . It was invented by a guy named Alfred Zehan.
The biggest difference is that a maglev train is not touching anything while it is traveling, while a normal train is sitting on steel rails at all times.