You will definately know when your belt is loose because you will hear a loud squeeking. When it comes off entirely you may lose Power Steering and other crucial functions.
This happened to me and I almost crashed head on into a semi, trust me, you'll want to get that checked out.
You can change the serpentine belt by loosening the tensioner pulley. When the tensioner pulley is loose and the serpentine belt will become loose. Put the new serpentine belt on and tighten the tensioner pulley.
If the belt is too loose or not there then yes - the water pump runs off the serpentine belt. If the belt is too loose or not there then yes - the water pump runs off the serpentine belt.
You don't. Serpentine belts are adjusted by a spring loaded device called a belt tensioner. If you belt is loose, then the tensioner is broken.
Loosen the tensioner pulley. Slide the tensioner pulley to the right. The serpentine belt will come loose. Remove the serpentine belt. Reverse the process to install the new serpentine belt.
When a serpentine belt is loose it means either the belt has stretched and needs replacing, or the idler tensioner is defective and needs replacing, or both.
Loosen the tensioner pulley. The serpentine belt will become loose and can be removed. Put the new serpentine belt on and tighten the tensioner pulley.
You will need to loosen the serpentine belt tensioner pulley on your 2002 Chevrolet Avalanche. Slide the belt tensioner to the right. The serpentine belt will become loose and can be removed. Reverse the process to install the new serpentine belt.
if a serpentine belt is loose, it needs replacing. there is an automatic tension pulley on all serpentine belts. so just buy a new belt and install
belt tension er spring
You don't tighten a serpentine belt. The tension is controlled by a tensioner. If it is loose, then the belt has stretched and needs replacing.
You don't/can't. If the belt is loose it may need replacement, the belt tensioner might need replacement, or the belt isn't installed correctly. If the symptoms were given, it would be easier to answer this question.
Loosen the tensioner pulley. Pushed the tensioner pulley to the left. The serpentine belt will come loose. Remove the belt. Reverse the process to install the new serpentine belt.