0
Spark plug gap is .031in., distributor Point gap .012in. , ignition timing is set at 0 degrees TDC at 700 rpm for a manual transmission and 750 rpm for an auto transmission.
Wiki User
∙ 14y ago
Add your answer:
Earn +20 pts
How much to replace injectors in 86 Toyota truck 22r?
To replace the injectors in 86 Toyota truck 22r, simply refer to your user and service manual.
Does your 86 Toyota truck 22R engine have a timing belt or chain?
It has a chain, they should be replaced every 100,000 but I had an 1987 Toyota pickup with 230,000 and never replaced a thing on it and it ran like a dream. if your truck is running bad then replace it if not. then don't waste time
Why would your 86 Toyota 22r carb rebuilt engine truck lose power going uo hills?
Belt
Where on the web can you find ignition timing specs for an 86 Chevy 305?
try autozone.com
I put a head from an 85 4x4 Toyota on my 86 2wd pick-up but the head is a 14 of an inch to tall an now my timing chain is too short how can i use this head?
you cannot use that head you will never get the timing in engine right The head of an 85 4x4 is the same as on 86 2wd pickup are the same on 22r or 22re. the only difference is the fuel pump has been capped off for the 22re. You probably got the head from a 4x4 with a different engine.
What is the spark plug gap for a 86 Chevy 305 G20 van?
.35 , you can also check the label in the front of the engine compartment, it will have all your gaps and timing specs
What is the head bolt torque specs on a samurai?
Head bolt specs for the '86 Samurai are 46 to 50.5 in. lbs.
How do you change a head on a 86 Toyota 22R motor?
very easy if you have some mechanical background, ie know what end of a wrench to use. buy a haynes manual on your car/truck...same motor... very detailed and easy to understand. cost about 12 to 20 bucks.
When was the Toyota 86 made?
It was started in 2012.
What antifreeze to use in 86 toyota pickup?
Green
94 Toyota truck transmission work in a 86 Toyota truck?
A manual can; an automatic will not, as the 94 transmission will be electronically controlled, whereas the 86 would be mechanically controlled.
What are the cylinder head torque specs for 86 Yamaha radain?
The cylinder head torque specs for a Yamaha Radian is 35.61 Nm. You can also say the specs are 3.6 kgf-m and 26.3 ft.lbs.
