0
What are the torque settings and sequence for the head bolts on a peugot2.0 306 sxi?
Wiki User
∙ 15y ago
Assuming this is a XU10J2C engine (1998cc 8 valve)
* Stage 1 - 35Nm * Stage 2 - 70Nm * Stage 3 - Angle Tighten through 160o Sequence:
8 4 1 5 9
7 3 2 6 10
Wiki User
∙ 15y ago
Add your answer:
Earn +20 pts
Torque settings for citroen saxo cylinder head bolts?
in sequence torque bolts to 20nm, then again in sequence turn a futher 120 degrees, and again in sequence 120 degrees.
Torque settings and tightening sequence for head bolts mg zr 160?
20nm +180 degree +180 degree
Torque settings for megane 1600 k4m?
torque settings for cylinder head bolts
What is the torque rating for the head bolt on 93 subaru 1.8 4 cylinder engine?
NOTEStep 1: Tighten all bolts to 22 ft. lbs.Step 2: Tighten all bolts to 51 ft. lbs.Step 3: Loosen all bolts, in reverse torque sequence, by 180°Step 4: Loosen all bolts, in reverse torque sequence again by 180°Step 5: Tighten bolts #1 and #2, in the torque sequence, to25 ft. lbs.Step 6: Tighten bolts #3,4,5 and #6, in the torque sequence, 11 ft. lbs.Step 7: Tighten all bolts, in torque sequence, by 80-90°Step 8: Tighten all bolts, in torque sequence, again by 80-90°
Subaru 2.2 Head torque specifications?
{| |- | NOTE Step 1: Tighten all bolts to 22 ft. lbs. Step 2: Tighten all bolts to 51 ft. lbs. Step 3: Loosen all bolts, in reverse torque sequence, by 180° Step 4: Loosen all bolts, in reverse torque sequence again by 180° Step 5: Tighten bolts #1 and #2, in the torque sequence, to25 ft. lbs. Step 6: Tighten bolts #3,4,5 and #6, in the torque sequence, 11 ft. lbs. Step 7: Tighten all bolts, in torque sequence, by 80-90° Step 8: Tighten all bolts, in torque sequence, again by 80-90° |}
What is the torque sequence for rocker arm bolts on a 1991 ford 1.9 engine?
There is no torque sequence just torque rocker arm studs to the proper torque
What is the torque settings on the main bearing bolts on a Kia K2700?
Torque settings for main bearings and big end bearings
What are the torque settings for the cylinder head bolts on a Plymouth neon 2.0L sohc?
The torque sequence is 25 ft lbs, 50 ft lbs, 50 ft lbs, and a 90 degree turn.
What are the torque settings and tightening sequence for the rocker box bolts on a Harley Davidson shovelhead engine.?
The rocker box bolt torque specifications, on your Harley-Davidson, is 15 pounds per square inch. The bolts should be torqued in five pound intervals.
What are the torque settings and tightening sequence for the rocker box bolts on a Harley Davidson shovelhead engine?
The rocker box bolt torque specifications, on your Harley-Davidson, is 15 pounds per square inch. The bolts should be torqued in five pound intervals.
Head bolts torque settings?
hi i am looking for the torque settings for a proton gen 2 cylinder head bolt and crank shaft bolts both big ends and main bearing bolts
Cylinder head torque wrench settings for 1600 Ford Escort?
Get a manual on your car and it will give you the settings of the intake, exhaust bolts plus the head bolts and torque pattern.
