The year and which engine you have would help.
The cylinder head bolt torque specs for a 1995 Chevy S10 2.2L are as follows: 1st: Torque the long bolts to 46 ft lbs, short bolts to 43 ft lbs 2nd: Turn all bolts an additional 90 degrees
what are the torque specks for 85 Chevy s10 with a 2.5 engine
how to drai torque converter on 1999 chevy blazer
33 ft lbs of torque
For the 1996 Chevy S-10 4.3 liter, the torque specs for the crankshaft damper bolts is 70 ft. lbs. For the cylinder head bolts, the torque is 65 ft. lbs, and for the engine mount-to-head bolts, the torque is 35 ft. lbs. For the engine mount-to-frame bolts, the torque is 52 ft. lbs.
For the 1992 Chevy S-10, 2.2 liter, first tighten the cylinder head bolts to 40-47 ft. lbs. If you're using new bolts finishing tightening them to 54-61 ft. lbs. If you're using the original bolts, finish tightening them to 61-69 ft. lbs.
80 to 120 ft lbs
the torque specs for the Chevy is 100 lbs...pretty much standard for all Chevy cars and small pick up trucks... you silverados torque at 140 lbs
you don't have to have the head checked but its recommended. the head bolts are supposed to be torqued in counterclockwise order from the inside bolts to the outside bolts. torque them in order in three stages to 18 ft/lbs then to 27 ft/lbs then an additional 120 degrees except the front right stud which you torque to 90 degrees
The torque specs for a 2003 Chevy S10 4x4 wheel bearing is 28 ft. lbs. This is equal to 38 N.m.
You need to remove the lower transmission inspection cover.
19 - 21 ft/lbs