For the 1992 Chevy S-10, 2.2 liter, first tighten the cylinder head bolts to 40-47 ft. lbs. If you're using new bolts finishing tightening them to 54-61 ft. lbs. If you're using the original bolts, finish tightening them to 61-69 ft. lbs.
65ft. LBS
18ft.lbs +60deg.+60Deg.+60Deg.+10Deg.
The cylinder head bolt torque specs for a 1995 Chevy S10 2.2L are as follows: 1st: Torque the long bolts to 46 ft lbs, short bolts to 43 ft lbs 2nd: Turn all bolts an additional 90 degrees
what is the torque setting for the head bolts on a 2007 chevy malibu with a 2.2L engine
the longer (new bolts) are to torqued to 48lbs and the shorter ones are to be torqued to 45lbs then turn the bolts an additional 90 degrees the bolts need to be replaced with new one because they are streched when you torque them down
on my '03' 125SX the head bolts should be 18nm.
Torque for 292 head bolts is 95 ft lbs
What are the torque specifications and the tightening sequence of the cylinder head bolts on a 1996 Saturn SL1?
The 1996 Chevrolet Cavalier 2.2 liter engine had bolt torque specifications are 120 pounds. The head bolts should be torqued at 40 pound intervals.
What is cylinder head torque specifications for 97 Chevy lumina 3.1 v6
The year and which engine you have would help.
the torque spec for what?