Want this question answered?
The head bolt torque specifications, for your Honda Accord 2.2 liter engine, is 120 pounds per square inch. The head bolts should be torqued in 30 pound intervals.
torque specifications
According to the 1994-1997 Honda Accord Service Manual the torque specs are: 74 N.m (7.5 kgf.m. 54 Ibf.ft)
here you go 22 lb first then 49 lb pounds
The main bearing torque specifications, for your Honda Civic 1.6 liter engine, is 160 pounds. The main bearing bolts should be torqued in 40 pound intervals.
what is the torque specifications for the intake bolts on a ford 4.2L?
This is a multi step process. 1. Torque all bolts starting in the middle and working your way diagonally to outside bolts torquing to 29 ft/lbs. 2. Torque all bolts again in same pattern to 54 ft/lbs. 3. Final torque to 72 ft/lbs.
65ft. LBS
Here is the bad news. There is some debat over wether or not they use "stretch bolts." If that is the case, then they need to be "tightened to yeild." Then with a micro meter designed for reading the stretch of the bolt, or in the case of head bolts, measure the additional angle of turn before stoping. The good news is, this is supposed to eliminate the need for re-torquing after 1,000 miles. I'd rather re-torque.
7.2ft lbs
what it the torque spec for head bolts on a 650 honda rincon 2005
In general starters do not have torque specifications. You will want to tighten the starter as tight as you can without breaking the starter bolts.