wich bolts do you need the specs on
You will need to consult with a manual (or ask a Honda-certified mechanic) on the sequencing of tightening the bolts on a cylinder head, but start with about 22 lb-ft/3.0 kg-m when you tighten all the bolts initially, then fully tighten them to 49 lb-ft/6.8 kg-m. Remember to keep the bolts lubricated before you do this...use engine oil or similar.
I believe that these specs do vary from model to model, but here are the specs for a 97-01 Prelude. Pressure plate bolts - 19 lb ft Flywheel bolts - 76 lb ft
The head bolt torque specifications, for your Honda Accord 2.2 liter engine, is 120 pounds per square inch. The head bolts should be torqued in 30 pound intervals.
The main bearing torque specifications, for your Honda Civic 1.6 liter engine, is 160 pounds. The main bearing bolts should be torqued in 40 pound intervals.
what it the torque spec for head bolts on a 650 honda rincon 2005
Just follow the lower water hose to where it meets the engine on the top and its that.. remove hose and three bolts and that's it.. drain the radiator first
torque for 2c engine cylinder head bolts
A C15 Caterpillar engine has dozens of torque specifications for many different engine bolts. The head bolts should be torqued at 350 pounds.
Conrod bolts
134 ft-1bs is the torque for 94 civics
29ftlbs
The torque specs for a Cadillac depend on which engine it has. For most 425, 572, 368, and 500 engines, the torque for the head bolts is 115 ft. pounds. The torque for the cam bolts is 25 ft. pounds, and the torque for the valve covers is 10 ft. pounds.