Want this question answered?
Haynes Auto Repair Manual say's Clutch pressure plate-to-flywheel Torque should be 11 to 15 Ft-LBS Hope that helps....
8.1 nm
whats the torque spec for the pressure plate on a 1998 kia sportage?
Cars use a single plate clutch as there is enough space to use the correct dia plate to create the right amount of torque, while motorbikes use multi-plate clutches because they have limited room and need to create more friction surfaces to produce the required torque.
The torque setting for the pressure plate on the clutch for an s10 2.2 is 33 foot pounds. The torque for the 4.3 is 29 foot pounds.
pressure plate to flywheel bolts - 15 to 24
19lbs ft
If a manual, bad clutch adjustment, worn clutch plate, worn pressure plate. If an automatic, bad torque converter. On either, check the parking brake.
There are many advantages of multi-plate clutches over single plate ones. They decrease the moment of inertia of the clutch and increase the amount of torque that is transmitted through increasing the frictional coefficient of the clutch plates. In addition, they decrease the amount of force needed to operate the clutch, enabling faster and smoother shifting.
35 ~ 46 Foot pounds of torque. Pressure plate bolts.
Just make the clutch pads line up with the clutch disk. the pressure plate can only go on one way due to the positioning dowels
Flywheel must be torqued to 105 ft/lbs. Clutch and pressure plate torqued to 22 ft/lbs.