Automatic transmission pan bolts torque specifications: 96 to 120 in-lbs. Haynes Repair Manual #36071, 1993-2005 Ford Ranger Pick-ups & 1994-2005 Mazda Pick-ups, B=-s Series
13 ft/pnds
I don't know the torque specs. You did not give the YEAR of what your working on. If you tighten the bolts until you see the gasket move and then just a 1/4 turn further that will be just right. It won't leak and be sure to move around to different bolts that are away from each other until there all tight.
Torque specs on a 2007 ram pinion
1 pound
the torque spec for what?
It is between the front of the transmission and the back of the engine block. It slides over a shaft and into the pump on the front of the transmission. Before you remove the transmission to service the torque converter you must remove the 3 bolts that hold the converter to the FLY-WHEEL.
Cylinder Head Bolts (1st Step) 68 N·m (50 ft. lbs.) Bolts (2nd Step) 143 N·m (105 ft. lbs.)
20 ft lbs
17 ft/lbs.
120 lbs
It is the part that the torque converter goes into in the transmission.It is the part that the torque converter goes into in the transmission.
65 foot pounds.