17 foot pounds on a 3.3 Liter, and 21 ft pounds on a 3.5 Liter
Remove the air intake hose from the Concorde. Take off the throttle cables and any fuel lines or vacuum hoses in the way. remove the bolts for the intake, then lift it straight up to remove it.
The 350 cubic inch Chevrolet intake manifold bolts have a torque specification of Haiti pounds psi. The bolts should be torqued at 40 pound intervals.
what is the torque specifications for the intake bolts on a ford 4.2L?
torque for bolts upper intake 1999 ford taurus 3.0 dohc
Intake bolts should be torqued to 35 ft lbs in the appropriate sequence. There should be 12 total "intake" bolts
I FOUND THIS AT WWW.AUTOZONE.COM, CLICK ON VEHICLE SPECS . For your 1999 CHEVROLET TRUCK BLAZER 2WD: INTAKE BOLT TORQUE FOOT POUNDS (FINAL TORQUE) TORQUE LOWER MANIFOLD BOLTS TO 27 IN/LBS TORQUE LOWER BOLTS TO 9 FT/LBS TORQUE LOWER BOLTS TO 11 FT/LBS TORQUE UPPER MANIFOLD BOLTS TO 44 IN/LBS TORQUE UPPER MANIFOLD BOLTS TO 7 FT/LBS (TO TORQUE BOLTS & NUTS, START IN CENTER USING CRISSCROSS PATTERN)
40 FT. LBS
Depends on the diameter of your intake bolts. For 5/16" bolts torque is 23-25 ft lbs, 3/8" bolts are 28-32 ft lbs, and the 1/4" bolts are torqued 6-9 ft lbs.
35 ft. lbs. on the intake, and 70 ft. lbs. on the flywheel.
Intake Manifold torque is 30 ft/lbs on the 460 Ford V8Valve cover is 10 ft/lbs
lower intake is 132 lb's upper intake is 89 lb
75 lbs