Want this question answered?
Haynes manual says 115 inch pounds- Start from center of intake using a criss-cross pattern, working your way to ends of intake.
Go to Your Local Automotive Store And They Will Usualy Print Out A Torque Sheet For Free.
14lbs
take it to a mechanic
i need to know what the torque specs are on the rocker arms for a 97 Chevy lumina, 3.1L v6
Yes it can but the intake is probably the bad guy. General Motors had alot of problems with them.
Cylinder head gasket torque specs on 2003 Pontiac Grand Prix 3.1 L V-6
Look where the thermostat is attached to the intake manifold
3100 Vin M apply high temp sealant Rtv to threds and under head bolts ( step one head bolts 37 ft lbs) (step 2 then 1/4 turn) lower intake torque four long bolts at step 1( 66 inch step 2( 10 ft lbs then the outer bolts right then left install upper intake and torque all 14 lb from center out do not under torque or over torque and make sure you have a accurate torque wrench not one that has been threw hell or drop. these motors are sensitive make it painless the first time
The intake manifold distributes the air fuel mixture from the carburetor to the cylinders. The exhaust manifold collects the exhaust gases from the cylinders and directs them out the exhaust pipe.
All of the torque specifications for vehicles can be found in Haynes Repair Manuals available at most auto parts stores.
The head bolt torque specifications, for your 2002 Pontiac Grand Prix, is 160 pounds per square inch. The head bolts should be torqued in 40 pound intervals.