I will list some specs not sure on which are needed.Valve stem to guide clearance for the intake 0.0007 to 0.0021 in (0.0178 to 0.053mm). Exhaust is 0.0007 to 0.0023 in ( 0.0178 to 0.058mm) Service limit 0.008 in (0.20mm) Intake valve stem diameter = standard 0.3161 to 0.3167 in (8.029 to 8.044mm) Service limit 0.002 in (0.05 mm) Margin width standard 0.059.1+ 0.0079 in (1.5 + 0.2mm)Note at the plus there is a minus sign under it for the margin on both set of specs. Service limit for b2000 0.039in (1.0 mm) Exhaust valve stem diameter standard 0.3159 to 0.3167 in (8.024 to 8.044 mm) service limit 0.002 (0.05 mm) Margin width 0.039 in (1.0 mm) Valve spring free length (outer) 1.598 in (40.6mm) Service limit 1.551 in (39.4mm) Valve spring installed height (outer) 1.385 in (34.5mm) Valve spring free length (inner) 1.406in (35.7mm) I certainly hope this helps it is alot of info.I suggest buying a haynes manual for about 25 bux it will be very usefull and have the specs for the entire truck.OK
0.012
The engine oil capacity for a 1986 Mazda B2000 is 4.1 quarts.
I believe the carburetor is a Mikuni. I have a 1986 B2000 myself.
4 quarts. I own a 1986 B2000.
where is fuel gauge and how to replaced for a 1986 Mazda pick up B2000 please let me know thank you
As of 2014, there are a few places where you can find a bed cap for a 1986 Mazda B2000. This part can be found at local body shops and auto part stores and through Mazda.
firing order is 1, 3, 4, 2 for a 86' B2000
The 1986 Mazda B2000 pickup truck has 14"x5.5" rims. The OE tire size is 205/75R14, and 195R14 tires also fit ideally.
Yes, a Mazda B2000 is most definitely a 4-cylinder with a 2.0L engine. However, technically Mazda didn't produce the B2000 as a 1988 model. It was made in 1986-1987. Then in 1989 Mazda made the B2200 Pickup, which is a 2.2L 4 cylinder.
more than likely a valve!
Yes
Buy akit - comes with instructions and gaskets