Here are tips: * Don't just replace the starter until you've verified that it is faulty. Check the starter first and make sure the problem isn't keyswitch, neutral lockout switch or a bad connection somewhere. * I changed the starter and found that the "trick or tip" is to first remove the oil filter (which means, prepare to do an oil change when replacing starter) and then it comes out through the vacant spot, where the filter was. You'll be doing an oil change too, because the oil filter must come out. I would try to jack the car from way underneath on the main frame; I put the toy car jack behind the front wheel, where the book says to put it, and my winshield cracked, which costs a further $250. You'd think the car designers would think about things like this happening. I'm sure of one thing; they're selling another windshield, so who knows??
The 1992 Oldsmobile Cutlass Supreme 3.1 liter engine starter is located on the bottom of the engine near the back. You can follow the positive battery cable directly to the starter.
GM usually uses a combination solenoid/switch/relay located beside the starter. One end engages the starter. The other end connects the battery to the starter motor.
I HAVE A 1992 OLDS CUTLASS SUPREME JUST BE FOR it warm up it cuts off
on the car
Where can I find diagram of electrical system on 1992 cutllas supreme
The 1992 Oldsmobile Cutlass supreme has two oxygen sensors. Both oxygen sensors are located on the outside of the air cleaner housing.
where is horn in 1992 cutlase supreme 3.1
yes the cluster works for 89 90 91 92 93
Usually, in the car or at the parts supplier.
Around 3200-3400 lbs
It is inside the fuel tank.
To reset the computer on a 1992 Oldsmobile Cutlass Supreme, unhook the battery for about five minutes. Then reconnect the battery. If this does not work, look for the reset button on the computer and manually reset it.