0
What else can I help you with?
Do you connect a compressor's positive or negative lead to a car battery first?
Posittive first then the negative
Should you connect the pos or neg terminal first when replacing a car battery?
Assuming the vehicle has a negative earth You connect the positive lead first The reasoning When the positive lead is fitted first, if you dropped a spanner across the battery negative terminal to the car body all you would do is make the circuit. If you connect the Negative lead first, and you dropped a spanner across the positive battery terminal to the car body you would then have a dead short
Where does the negative battery cable connect to?
The negative battery lead cable is to be connected to the negative lead terminal on the battery.
How do you connect a 24 volt charger to two 12 volt batteries?
You connect the batteries in series Red charger lead to one red battery terminal, then the black battery terminal of that battery to the red battery terminal of the second battery. Then black battery terminal of the second battery to the black lead of the charger.
Where do you connect the positive battery lead to the starter or the alternator?
Starter solenoid.
What is a battery method of a single phase transformer?
Connect a VOM to one winding. Momentarily connect a battery to the other winding. When the battery makes contact, a pulse will occur on the other winding. If the pulse is positive, then the terminal connected to the plus lead is in phase with the lead connected to the battery.
Can you charge two 6v batteries in a series with a 12v charger and which posts do you connect the charger to?
Yes you can. Connect the chargers positive lead to the positive of one battery, then the negative side of that battery to the positive side of the other battery, then connect the negative lead of the charger to the negative of the second battery. Double check all your connections and turn on the charger.
How do you charge the battery on a 2000 e430?
To charge the battery on a 2000 Mercedes-Benz E430, first ensure the vehicle is turned off and park it on a flat surface. Connect the positive (+) terminal of the battery to the positive lead of a battery charger, then connect the negative (-) terminal of the battery to the negative lead of the charger. Set the charger to the appropriate voltage and current settings, then plug it in and turn it on. Monitor the charging process, and once complete, disconnect the charger in reverse order.
Should you disconnect the positive or negative battery terminal first?
Negative, that way if hit a ground while on pos bolt it wont short out.
How do you connect jump leads to a Renault clio 1998?
To connect jump leads to a 1998 Renault Clio, first, ensure both vehicles are turned off. Attach the red (positive) lead to the positive terminal of the dead battery, then connect the other end to the positive terminal of the good battery. Next, attach the black (negative) lead to the negative terminal of the good battery, and connect the other end to an unpainted metal surface on the engine block or chassis of the Clio to ground it. Finally, start the working vehicle, then the Clio.
How do you jump start a vauxhall vivaro van?
To jump start a Vauxhall Vivaro van, start by removing the battery cover. Taking your cables, connect one end of the lead to the positive terminal on the discharged battery, then connect the other end of this lead to the positive terminal on the battery you are jumping from. Take the other lead and connect it to the negative terminal on the discharged battery. Next, use the end of this lead to connect somewhere to ground the current; for example, the engine block or screw connection in the engine suspension on the vehicle providing the jump. When finished, remove the leads in the exact opposite direction you applied them.
How do you connect jump leads?
Both vehicles off, connect red lead to positive terminal on dead battery, then to positive terminal on working battery. Connect black lead to negative terminal on working battery, then to metal surface on dead car away from battery. Start working car, wait few minutes, then try starting dead car. Preferred: follow vehicle owner's manual for specifics.
