0
If you mean you cannot read the display on your mileage, odometer, and other items go to http://www.bba-reman.com/
Wiki User
∙ 16y ago
Add your answer:
Earn +20 pts
7 segment display LED?
A seven segment display is a device used to display numbers and letters on things such as alarm clocks. A 7 segment display is simply seven LED's packaged in a pattern that allows numbers and letters to be displayed by illuminating different sets of LED's.
What is the purpose of the light-emitting diod?
Light Emitting Diodes (or LED's) serve many purposes, such as statuses (EG Computer is powered on, PC is reading from Hard disk (Power and HDD LED's)). They can also be used to display messages (LED Boards) New age brighter LED's are used in the Audi and BMW cars as sidelights. 4 L1GH7 3M1771N6 D10D35 1S C001
What is LED-LCD tv?
LCD displays use tiny liquid crystal shutters, one for each pixel that makes up the display. Behind the shutters is a light source that passes through the shutter when it is open. LCD displays have used a form of fluorescent lighting behind the shutters but increasingly, LEDs are being used as the light source. The display technology hasn't changed, just the light source. Note that these are different to true LED displays. These use LEDs to create the image directly and replace the liquid crystal shutters and the light source behind them. Although they are a very recent introduction in domestic televisions, this technology has been around in the large arena and stadium displays for many years.
What is the difference between LED and LCD?
LED, they are lighter,thinner, consume less power,last longer, and have better color and picture.LCD- Cheaper.2nd Answer:Surprise! They are BOTH LCD screens. The older style are lighted from behind with fluorescent lighting, which is not color perfect.The newer style have LCD screens that are lighted from behind with LEDs, which have nearly perfect color, and are also much sharper.3rd answer:LED are light emitting diodes, and an LED display is composed of a matrix of many light emitting diodes. The LED display, therefore, is an active emitter of light. LCD is short for liquid crystal display. It operates on the basis of reflected (or not reflected) light, but is in itself not an active light emitter. Modern LCD designs act as transparent displays with a backlight shining through, but the display itself is not actively emitting light.LED displays offer higher contrast, speed and brightness, but LCD displays offer lower manufacturing cost.LCD stands for liquid crystal display. The technology uses tiny cells that are used to open and close shutters. As the shutters are opened, light can pass through them. In a television, the cells are arrange in groups of three, with a red, a green and a blue filter.An LCD television needs a light source behind the display screen and this has traditionally been several fluorescent tubes. 2009 saw the introduction of white LED arrays as a light source rather than fluorescent tubes. The LED technology allows for more efficient lighting and thinner cases for the televisions but the display technology itself is unchanged.Confusingly, there is now a small but growing selection of LED televisions that do not use LCD at all. These models feature a red, a green and a blue light emitting diode for each pixel of the image. The image is created by the LEDs glowing at varying intensities and so they do not need any kind of back light. This same technology is used in large arena and open air displays but only now is it becoming practical to produce compact LED arrays of a size to suit domestic size displays. True LED televisions are in their infancy in 2010 but we can expect the technology to mature over the coming years and it is likely that they will become the dominant display technology in the coming years.
Is it possible to display the result on a 7 segment LED display wirelessly to another 7 segment LED display a few meters away?
Remote 7 segment display ideaIt is possible only with another means of transmission of which infra red or bluetooth is most propably the easiest and better known. The problem arises, that you will need a transmitter and a receiver, for which you will need quite a few complicated circuits. Bluetooth is cheap and relatively easy once you know how to connect it to the LED display, but it would be much better to connect the transmitter to whatever is driving your first display. This is usually way beyond most electronic hobbyists capabilities. I for one won't even try! It would be cheaper in development time to buy a remote indicator, even two smartphones with appropriate software could be used. The Nokia 6680 can support Hyperterminal, which means you can control another device with it via bluetooth, cable or infrared. A relatively cheap and easy way would be to add an infrared(IR) LED in your display. I.e. you would have 8 LED's to drive. The last IR LED could then be programmed to transmit a different code for every "digit" you display. (Try Morse code, but remember that it have to be real fast.) Your IR receiver needs a programmed decoder on te other side to interpret code and re-convert it back to 7 segment display. The electronics for this can be found in any old ball mouse, but the "lens" in front of the LED's need to be modified to transmit over longer distances. An old TV remote have the best IR LED's for a transmitter, but they are cheap anyway.Some cheap digital two way radios have the capability of sending digital data over the air, so it could be possible to set this up if you know electronics and programming.More Ideas- There are cheap low-power FM transmitter circuits or pre-built boards available, and one-chip FM receivers. Or homebrew one. Or AM circuits. Stay legal with the FCC, though. - Use an standard IR receiver designed for remote control applications. These are cheap and include a 32-40 kHz modulator to avoid interference from other light sources. You can even hack a universal remote control and allow for other commands. Or modulate on your own with IR LED and IR photodiode.- Use a Zigbee chip. (similar to Bluetooth concept, but even lower power, designed for limited update rates).- Check with robotics enthusiasts. They need similar devices all the time.
What button to push to enter radio code 96 c280 i have no led display is it sc button?
yes. once you put the code in press the sc button
How do you set the clock on a 2000 Mitsubishi eclipse?
Hold down one of the buttons next to the LED display and you will see the numbers go up.
How do you operate display screen 2002 M-B C-240?
There is no built-in display screen on the 2002 model of the Mercedes Benz (M-B) C240, other than the LED dash display. The dash display automatically turns on when the key is turned in the ignition, and is operated by buttons on the central console.
How do you operate the heater on a 1995 jaguar xj6?
Push the rotary fan switch in to activate the system, the selected temperature will be shown in the LCD display to the right of the fan switch. The toggle switches directly below the LCD display raise and lower the selected temperature (blue for cooler & red for warmer) then select the desired vents from the illustrated push buttons, they will show a red LED light when active. OR select the desired temperature and simply push the "Auto" button and it will automatically adjust vents and fan speed as necessary to maintain your preset temperature
What is difference in wxga display and led display?
led is a backlighting technology. wxga is a display resolution standard (1280x768 pixels).
What is the abbreviation for led tv?
Light-Emitting Diode =LED LED is not a kind of display, when we say LED tv is actually means LCD display with LED back lights.
Where can one find more information about LED display boards?
There are many websites and companies that offer resources and information about LED display boards. The best website for information LED display boards is Wired How-to Wiki.
7 segment display LED?
A seven segment display is a device used to display numbers and letters on things such as alarm clocks. A 7 segment display is simply seven LED's packaged in a pattern that allows numbers and letters to be displayed by illuminating different sets of LED's.
What is the life of led backlight display?
20,000 to 30,000 hours (approx 3 years) is the average life of a LED backlight display.
What is another name for monitor?
nothing
What is better 16M colours or LED?
The number of colors in a display is different to the form of the display. LED or CCFL illumination of an LCD display does not in any way impact on the number of colors that can be resolved.
Is 7 segment led a combinational circuit?
A: NO it is a display of seven segment to display a decimal of '0' to '9' it may have 8 LED for the point
