You can check the ground in the wiring if nothing else works. However, it would also be a good idea to see if you are just making a simple mistake. Sometimes the light-on switch is separate from the hi-beam/lo-beam switch; try pulling back on the turn signal lever while the light is on. It should switch between hi and lo beam.
check that you're getting dc voltage to the brake bulb sockets. also, clean out and replace any old electrical grease at the bulb's sockets.
No. The sockets are different sizes.
Metric 6 point sockets are the most commonly used sockets today. American made vehicle used to only have standard bolt, but today they are being replaced by metric bolts like all other manufacturers.
not secured properly, user sockets
Did you mean turn signal sockets? Replacements can be bought with pigtail leads that can be spliced in, or OEM replacement parts may have an in-line connector. I haven't replaced any sockets on my Intrigue, so I can't speak from experience. Most of the sockets I have replaced were cracked or heat damaged, and they usually snap in or twist in to the bezel or housing. Be careful to first observe how the socket is mounted as the all-plastic parts on cars can easily break.
Check sockets and grounds
Check the bulbs- they are double filamented with the smaller for brake lights Check the fuse Check the sockets for power and ground Check the sockets for corrosion
Most calculators need very little maintenance. If keys are sticking, the keyboard can be disassembled and cleaned; batteries can be replaced and battery contacts cleaned; and charger sockets can be replaced or repaired. That is about it, though.
That's kinda weird. I have a guess, though. I'd check for loose connections in the light sockets or wiring, primarily a loose ground wire.Let us know what you find.FriPilot
"Main sockets" is referring to fuse sockets, particularly the main fuse sockets for a fuse panel.
Yes it's possible to have food in the holes where you wisdom teeth got pulled. Due to the fact that you could have dry sockets. Always follow the directions that the dentist tells you or you will get dry sockets. When you get dry sockets you have to return to an Oral surgeon weekly to get you goz replaced. I hope this question fulfilled the answer. Thanks.
There is a campaign on the brake bulbs for 2000-2003......If it hasn't been done you should get it done. The bulbs and sockets will be replaced.