== Hazard and turn signals switch are different. Sounds like you need a new turn sig. switch. The turn signals are routed through the hazard switch. Re-check fuses 4 and 19. If they are fine, check/test the hazard switch and related wiring; if the switch is faulty, replace it. If the switch is good, check/test relay in position 12.
try replacing all sets of fuses for the hazard and the tail lights.
Check Flasher and/or switch
If the lights come on but do not flash, replace the flasher relay. If they will not come on check the fuses.
If lights light up but do not flash, then need to change the flasher, if no light at all chk all fuses first.
Try replacing the turn signal flasher
Check your relay switches that should be located near the fuse box.
Two different switches. The combination switch on the column is most likely the culprit. This may be fuses. The turn signals and hazard lights are fed by separate circuits.
Check the fuses and it may be the flasher relay as they have 2 try turning the hazard lights on and off a few time as you relay may be stuck.
There is sometimes a separate flasher for the four way curcuit.
my daughters 1991 miusbishi montero has no break lights , turn signals or hasard lights . All tail lights and front markers are working. All fuses are cking good and all bulbs are good..Is my blinker switch bad ? capri
the turn signal flasher may be the problem moast vehickles have one forturn &one for 4way
Try replacing the hazard flasher. If that does not work, double-check to see that you have the proper bulbs and fuses installed for the brake lamp circuit.