0
What else can I help you with?
Why are your brake lights and hazard lights not working on a 99 Chevy turn signals and top brake light is working fine?
turn signal switch needs replaced!
Why doesn't the turn signal lights turn on but the hazard lights work?
If the turn signals on a car works but the hazard lights do not there may be a problem with the flasher switch. The flasher is located in the steering column, and a damaged unit can cause the lights to stop working.
Why would the turn signals and hazard lights stop working on a 2006 Hyundai Sonata?
You may have blown a fuse or a flasher.
Why are the Hazard lights not working 98 Mazda b4000 but turn signals work?
your hassard lites have a separate flaher relay change it.
Why do you have no dash lights but your hazard lights are staying on constant?
Try pushing the hazard light switch on steering column repeatedly. I had a strange problem with my hazards once and this fixed it for now. I think my problem was the signals not working though....
Which relay do you need to replace on a 1997 F-150 to fix the turn signals and hazard lights which are no longer working?
The turn signal and the hazard lights each have their own relay. Sounds like you have to replace both relays.
Why do my hazard lights keep blinking on 1988 Mazda B2200 truck until I turn headlights on but then the turn signals stop working?
first make sure hazard lights are not on.next you need to ckeck the grounds from the battery.
Why are Hazards working but indicators not flashing on Audi tt?
It contains two relays, one for hazard lights and the other for turn signals. The one for the turn signals is defective and must be replaced.
You have a 1992 caprice and you can't get your hazard lights to work but your turn signals work fine Please help?
If your hazard lights don't work but your turn signals do work it could be that your Hazard Lamp Flasher needs to be replaced. Your car has both a "hazard lamp flasher" and a "turn signal lamp flasher". Your "turn signal lamp flasher" is working but your "Hazard Lamp Flasher" may not be working. Buy a new "hazard lamp flasher" and install it. The hazard lamp flasher is located behind the instrument panel to the left of the steering column.
Why are hazard and signal lights not working?
bad fuse or hazard switch
Why would the blinkers not work when the hazard lights are working on a 1994 Mercury Villager LS?
Two different switches. The combination switch on the column is most likely the culprit. This may be fuses. The turn signals and hazard lights are fed by separate circuits.
How do you fix the turn signals on a 1998 Mitsubishi Eclipse the hazard lights work?
try replacing all sets of fuses for the hazard and the tail lights.
