The turn signal and the hazard lights each have their own relay. Sounds like you have to replace both relays.
Add your answer:
Related Questions
Ford econoline flashers work but no turn signals?
Defective Flasher Relay, replace it. One relay operates the Hazard Lights and the other operates the turn signals. Be sure and replace the correct one.Defective Flasher Relay, replace it. One relay operates the Hazard Lights and the other operates the turn signals. Be sure and replace the correct one.
Signal lights and hazard lights not working in 2002 passat?
It's the turn signal indicator-located behind the hazard lights.You have to take it out and replace it.
Your turn signals on your 2001 impala will sometimes not workwhere should you look?
Try turning the hazard flashers on and off a couple times, see if that starts your signal lights working. If so, replace the hazard switch/module.
Why are your brake lights and hazard lights not working on a 99 Chevy turn signals and top brake light is working fine?
turn signal switch needs replaced!
Why would your hazard lights work but both turn signals do not work on a Chevy s10 pickup?
hazards and turn signals have separate flashers. replace flasher for turn signals
Why will my hazard lights work but my blinkers won't on a 2000 grand Cherokee?
It probably has 2 Flasher Relays. One for the hazard lights and one for the turn signals. Replace the turn signal flasher.
Why doesn't the turn signal lights turn on but the hazard lights work?
If the turn signals on a car works but the hazard lights do not there may be a problem with the flasher switch. The flasher is located in the steering column, and a damaged unit can cause the lights to stop working.
Why do hazard lights work but turn signals do not?
They use separate flasher relays. Replace the turn signal flasher relay.
Why would the turn signals and hazard lights stop working on a 2006 Hyundai Sonata?
You may have blown a fuse or a flasher.
What would be the problem causing your signal light and emergency hazard light not to come on?
There are 2 flasher units under the dash. 1 for the turn signals and 1 for the hazard lights. They are round and you need to pull them straight out, then replace them. What I do is I figure out which one works the signals and I replace that one with a heavy duty one, the other can be a regular one. If the lights don't come on but the signals are working it can sometimes be the bulbs, other times it's a short like the other person said.
Both turn signals are dead and hazard lights on your 1997 Grand voyager?
If the lights come on but do not flash, replace the flasher relay. If they will not come on check the fuses.
Why are the Hazard lights not working 98 Mazda b4000 but turn signals work?
your hassard lites have a separate flaher relay change it.
Why do my hazard lights keep blinking on 1988 Mazda B2200 truck until I turn headlights on but then the turn signals stop working?
first make sure hazard lights are not on.next you need to ckeck the grounds from the battery.
Why do you have no dash lights but your hazard lights are staying on constant?
Try pushing the hazard light switch on steering column repeatedly. I had a strange problem with my hazards once and this fixed it for now. I think my problem was the signals not working though....
No brake lights turn signal or hazard lights in a 94 Honda Civic?
Your problem very well could be the hazard switch. i have a 1994 honda civic too i found whenever i disconnected the hazard switch from the wiring harness my turn signals brake lights and of course hazards do not work. Maybe replace the hazard switch..
1974 super beetle turn signals not working?
Replace the flasher relay if the lights come on but do not flash.
You have a 1992 caprice and you can't get your hazard lights to work but your turn signals work fine Please help?
If your hazard lights don't work but your turn signals do work it could be that your Hazard Lamp Flasher needs to be replaced. Your car has both a "hazard lamp flasher" and a "turn signal lamp flasher". Your "turn signal lamp flasher" is working but your "Hazard Lamp Flasher" may not be working. Buy a new "hazard lamp flasher" and install it. The hazard lamp flasher is located behind the instrument panel to the left of the steering column.
Why are Hazards working but indicators not flashing on Audi tt?
It contains two relays, one for hazard lights and the other for turn signals. The one for the turn signals is defective and must be replaced.
Why do the tail lights not come on 1998 ford ranger which fuse is it?
if turn signals are working , and brake lights not working, i would replace the stop light switch on the brake pedal
Why are hazard and signal lights not working?
bad fuse or hazard switch
Ford f 250 Hazard lights work but turn signals do not?
Hazard and turn signals usually use separate flashers, switch the flashers to see if turn signals work and hazards don't, if so replace the flasher you need to replace the blinker flasher unit it is different from the hazard unit they cost about 4 bucks the flasher unit is the big round thing in the fuse panel in the dashboard
Why do the hazard lights stay on in dashboard?
If you will notice the hazard lights are not actually flashing, reason being, the hazard flasher relay is defective. Replace it.
How do you fix the turn signals on a 1998 Mitsubishi Eclipse the hazard lights work?
try replacing all sets of fuses for the hazard and the tail lights.
Why would the blinkers not work when the hazard lights are working on a 1994 Mercury Villager LS?
Two different switches. The combination switch on the column is most likely the culprit. This may be fuses. The turn signals and hazard lights are fed by separate circuits.
Can the hazard switch keep the turn signals from working?
Not typically. answer yes the hazard lights stop turn sinals from working there are only 2 elements in the bulb one for stop and one for turn hazars use same eement as turns signals it is for that reason that it is illegal in most states to actually drive with your hazards working they are supposed to be used only when stopped
