mines a 350 and it has the same intake casting number as yours but in order to know for sure look at the back of the engine on the bell housing next to the head on the driver side and thats your casting number for your block. that will tell you for sure
Intake Manifold 140557055 is for a 283 SB Chevy.
Number 5 in the picture
It will usually say the piston number on the intake manifold on most cars.
Remove the intake manifold.
The air temp sensor is in the intake manifold, in the cylinder number 6 intake runner (drivers side, second cylinder from the front) in the lower intake manifold. The plug should have a yellow wire and a black wire.
The IAT sensor on a 2004 Dodge Neon is on the intake manifold. It is inside the number two intake runner.
the valve on intake port side and exhause valve on exhaust manifold side.
behind the intake manifold - near the firewall above the bellhousing
Behind the intake manifold, there are 4 of them. From the passenger side its solenoid number 2, and number 4
I believe it's sticking out of the intake manifold somewhere depending on the engine size. yeah if it's a v8 it should be on the number two intake runner
Intake manifold runner control aka imrc valve
A cast aluminum intake manifold used on the 1965 396 cu in Corvette engine.